Blog Entries
How to Replace Battery for Autel PowerScan PS100?
Category: General
Tags: Autel PowerScan PS100 Autel PS100

 Autel PS100 is a powerful electrical system diagnosis tool.Featuring AVOmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester and bad ground indicator, the PowerScan is truly the ultimate in power and affordability, allowing users to check circuitry in one single step.Autel Tool



How to Replace Battery for Autel PowerScan PS100?

Remove the worn switch with a pry tool. Be careful when applying force.

Make sure to install the switch straight and press until flush with casing.


It is recommended when buying you get two. This will fix your tool now and give you a spare so you won‟t experience any down time in the future.
src:http://www.uobdii.com/wholesale/autel-powerscan-ps100-electrical-system-diagnostic-tool.html

BMW AK90+ II and AK90+ Programmer,which is better?
Category: General
Tags: BMW Key Programmer BMW AK90+ II

BMW AK90+ II compares BMW AK90+: both are the best EWS key programmer; BMW AK90+ II update: add the key info reading function for new F series CAS4/CAS4+/ and new Porsche, also the key renew functions for BMW CAS1-4.
Part 1: BMW AK90+ II Vs. BMW AK90+: the Differences

  1. BMW AK90+ IIUpdate:

BMW E series PCF7945 chip

The original factory PCF7953 chip renew function (restore to a new key state)
New BMW F series CAS4/CAS4+/ new Porsche: adds key information identification function.Automobile fix

  1. The package: not the same

AK90+ II package comes with one 6 Pin Cable ( image 1);
AK90+ with 10 pin cable (image 2).
bmw-ak90-ii-key-programmer-package

You can see the package includes one piece of AK90+ II Host, AK90+ II 6 Pin Cable, AK90+ II Chip data to read specific seat, AK90+ II software CD-ROM, AK90+ II USB communication cable etc.auto key cutting
bmw-ak90-plus-key-programmer

AK90+ package includes AK90+ Host, 10 Pin Cable, AK90-Chip data to read specific seat, AK90 V3.19 software CD-ROM, AK90+ USB communication cable.

Part 2: BMW AK90+ II Vs. BMW AK90+: the Similarities   

  1. Best BMW EWS key programmer:

Both can program key for EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4 from 1995-2009
 

  1. functions : Same
  2. Directly reading data dumps from MCU which marked 1D47J,2D47J,0D46J,2L86D without removing MCU from circuit board,easy to do yourself.
    2. With the help of software you can change VIN,Mileage and renew, lock or unlock keys as well.
    3. Programming original chips “EML 10030A” for making keys .
    4. Identifying keys for all EWS ,showing VIN, key No. and mileage .

 

  1. Way:Same

No need to disassemble the chip, safe and efficiently.

  1. Language: English, Chinese
  2. OS:WinXP, Win7


Conclusion:
AK90+ II wins in functions.
AK90+ wins in Price (35USD only)
Article from:http://www.keycuttingmachine.org/bmw-ak90-ii-genupdate-version-of-bmw-ak90good-choice/

Compare:OBDSTAR X300 DP Plus,X300 DP,Lonsdor K518
Category: General
Tags: OBDSTAR X300 DP Plus

Post topic: obdstar X300 DP plus VS X300 DP VS Lonsdor k518ise in the software functions, vehicle coverage, features, hardware etc. And followed with obdstar X300 DP plus A package Vs B package Vs C package. Finally ends with obdstar X300 DP plus features & real pictures.

Part 1: obdstar X300 DP plus VS X300 DP VS Lonsdor k518ise

Software function Content OBDSTAR X300 DP Plus Lonsdor K518ISE OBDSTAR X300 DP 
x300-dp-plus lonsdor-k518ise x300-dp-key-master
Price   $1699-$1999 (A package -C package) free shipping $1199 free shipping $829 free shipping
Immobilizer system Key/Remote programming Yes Yes Yes
  EEPROM Yes Yes Yes
  Key Renew Yes   Yes
Odometer Correction VW Yes Yes Yes
  Porsche Yes Yes Yes
  Jaguar Yes Yes Yes
  Land rover Yes Yes Yes
  Mazda Yes Yes Yes
  Audi Yes Yes Yes
  Renault Yes Yes Yes
  Hummer Yes Yes No
  Hyundai Yes Yes Yes
  Kia Yes Yes Yes
  Besturn Yes Yes Yes
  Skoda Yes   Yes
  Seat Yes   Yes
  Benz Yes   Yes
  Bentley Yes   Yes
  Lincoln Yes   Yes
  Chrysler Yes   Yes
  GM Yes   Yes
  Infiniti Yes   Yes
  Mitsubishi Yes   Yes
  Nissan Yes   Yes
  Ssangyong Yes   Yes
  Subaru Yes   Yes
  Suzuki Yes   Yes
  GreatWall Yes   Yes
  Geely Yes   Yes
  Fiat Yes   Yes
  Citroen Yes   Yes
  MG Yes   Yes
  Rowe Yes   Yes
  Baoteng Yes   No
  Peugeot Yes   Yes
  Opel Yes   Yes
  Volvo Yes   Yes
  Smart Yes   Yes
  Alfa Romeo Yes   No
  Ferrari Yes   Yes
Diagnostic Full system diagnostic Yes   Diagnosis (Japanese and Korean Series)
Special Functions Service reset Yes    
  Manual remote control Yes   Yes
  ABS bleeding Yes   Yes
  Battery matching Yes   Yes
  ECU programming Yes   No
  EPB Yes   Yes
  Throttle programming Yes   Yes
  Airbag reset Yes   Yes
  TPMS reset Yes   Yes
  Steering angle reset Yes   Yes
  OBDII Yes   Yes
  DPF Regen Yes   Yes
  Injector coding Yes   Yes
  Suspension Yes   NO
  Gear learning Yes   Yes
  CVT learning Yes   Yes
  Steering angle repair Yes    
  ECU Clone Yes    
  Switch activation Yes    
Hardware Test Frequency/ Yes    
Remote Tester  
  Anti-theft Induction coil Yes    
  P001 programmer unit Yes    
  C001 circuit board Yes    
  C002 circuit board Yes    
  W001 data cable Yes    
  W002 data cable Yes    
  W003 data cable Yes    
  Toyota smart key emulators Yes Yes  


Part 2: obdstar X300 DP plus obdstar X300 DP plus A package Vs B package Vs C package
 

Functions Regional market Software Configuration X300 DP plus Remark
      A package B package C package  
Immobilizer / Remote programming European cars VW/Audi/Skoda/Seat (Standard)  
VW/Audi/Skoda/Seat (Advanced) add NEC
24C64
2014-key
programming.
BMW (Standard)        
BMW (Advanced) Add FEM/BDC
key programming,
ISN code
reading etc.
Volvo  
The other European cars  
Asian cars Hyundai /Kia (Standard)        
Hyundai /Kia (Advanced) Add 47/8A/46 smart
key pin code
reading
Toyota /Lexus (Standard)        
Toyota /Lexus (Advanced) For Middle
east cars,
it adds H chip all
keys lost(Immo
box reset)
The Asian cars  
North American cars Ford(Standard)        
Ford (Advanced) Add Ford after
2015 key
programming
functions,I.E:
Mobdeo,Edge,
Taurus,Escort,
EVEREST,
Explorer,F-150
SVT Raptor,
Mustang,
Lincoln MKZ,
MKCand
Continental
2015 – etc.
GM(Standard)        
GM(Advanced)  
The other American &
Chinese cars
Can perform
BMC pin code
reaing on these
cars: -2017
Lacrosse,Lacrosse,
Trax,Envision, GL8,
MALIBU,
AVEO,Excelle before
2015,Cruze etc.
Cluster Calibration   All cars cluster calibration    
    4-system diagnosis       Engine,
Transmission,
ABS, airbag reset
OBDII Diagnosis   Full functions diagnosis     Full-system
all-cars
diagnosis
Special function   Oil service reset     Reset the Oil Service
Light on
  Manual remote setting       Some cars onl
supports manual
remote setting.
  ABS bleeding     After replace the
ABS pump and
related components.
  Battery matching     After the battery
is changed, you need
to match the battery.
  ECU programming      
  The car with EPB replace brake pads     Electronic
Parking Brake
release
  Throttle programming     Used to clear
the learning
value after
cleaning the
throttle,
otherwise it
will cause high
idle speed.
  Airbag reset     Used to clear
airbag ECU
collision data
after a vehicle
collision,
otherwise the
ECU cannot be
reused
  TPMS reset     Used for reset
after tire pressure
alarm
  Steering angle reset     Replacement of
data lost after
steering angle
change or power off
  OBDII Engine     Used to diagnose
the car with
OBD protocol.
  DPF Regeneration     Diesel Particulate
Filter Operational
  Injector coding     Used to match and
code the injector
after replacement
  Suspension match     Used to match and
set the suspension
after adjusting.
  Gear learning     Used to learn
the crankshaft
position sensor
after power
off (only the
domestic vehicle
equipped with
the Delphi
system has this
function)
  CVT learning     Used to reset the
learning value
after maintenance
of CVT transmission
  EEPROM     Read and write the
eeprom;read 8-pin
IC chip password
and reset some
models anti-theft
  Key Renew     Renew the used
keys to solve
the problem that
used keys
cannot be matched
to other models
  Steering angle repair     Used for the repair
of lost data
of vehicle steering
angle sensor
  ECU Clone     Used for copying the
program
when replacing the
new/second-hand
computer.
  Switch activation      
Hardware   P001 Programmer unit  
  C001 circuit board  
  C002 circuit board  
  W001 data cable  
  W002 data cable  
  W003 data cable  
  Toyota smart key emulators  
  Remote Tester  
  Anti-theft Induction coil Used to test if the
coil can send
out the transmit
signal.

 
Part 3: obdstar X300 DP plus features & real pictures.
Hardware Advantages:

  1. Built-in VCI box
  2. 8-inch touch screen

x300-dp-plus

  1. Chargedirectly via OBD interface
  2. Practical and high-end gift box
  3. Industrial design with silicone case
  4. Back bracket design:prop on the steering wheel or stand on the table
  5. With 4 Toyota simulation keys (the fifth is coming soon)

toyota-simulated-smart-key
Simulated key 1 applies to the vehicle with 94/D4 type of smart key;
Simulated key 2 applies to the vehicle with 98 type of smart key;
Simulated key 3 applies to the vehicle with 88/A8 type of smart key;
Simulated key 4 applies to the vehicle with A9 type of smart key;
8.  P001 programmer: EEPROM adapter + RFID adapter+ Key Renew adapter
x300-dp-3-in-1-adapter

  1. Add the clip of reading SOP 8PIN EEPROM


10. C001/C002 circuit board to read and write chip data with weldingC001 circuit board
Image 1: C001 circuit board is compatible with old NO. 3 and 4 circuit boards, applying to EEPROM chip dismantling and reading, Tianjin FAW and VIZHI immobilizer coil initialization and other functions.C001 circuit board
Image 2: C002 circuit board is connected by W001, W002 or W003 without welding the chip.
 

  1. IMMO induction coil to detect the key induction coil failure of the vehicle.


12. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)
 ecu-test-cable-3

ECU Programming/Cloning
ECU cloning means copy ECU, that is the OBDSTAR X300 DP Plus copies the data from the original car ECU, then write it into another same ECU hardware, so that it can achieve the same function as the original ECU.
When you want to change the new ECU or the second ECU, if you use X300 DP Plus to clone via OBD, you won’t need to go to the 4s store to do the online programming or dismantle ECU to weld, read & write.
ECU clone Pros :
No need to go to 4S shop, convenient, fast and save money.
Simplify the operating steps, even the amateur can also operate.
No need to dismantle and weld the ECU to read & write, it is zero risk to clone ECU via OBD with the X300 DP Plus.

Switch activation function
Nowadays, many car models’ accessory power supply of the dashboard or audio equipment needs to be activated to enter the boot status through the related module CAN.
However, when the car technician maintains the dashboard / audio equipment, the main unit is out of the CANBUS network so it maybe won’t boot. X300 DP plus” switch activation function” can emulate the CANBUS communication to active the power supply of dashboard / Audio so that it can enter the boot status, then it will test and verify the dashboard and the Audio, also the technician can save money avoiding to purchase many the boot platform and cables of kinds of car models
13. Adds the “Help” functionincluding the testable car models, update notice, special features, help instruction, wiring diagram etc.
Testable car models: The user can read the testable car models and year.
Update notice: The user can read all of the update content.
Features: The user can read all of the special features and the functions that only X300 DP Plus supports.
Help instruction: Built-in the guide and instruction for each car model or function.
Wiring diagram: Built-in ECU wiring diagram, more intuitive and convenient.
Pictures mean a lot:


obdstar DP plus accessories:
obdstar X300 dp plus accessories
OBDSTAR X300 DP Plus Package:
OBDSTAR X300 DP Plus Package-1 OBDSTAR X300 DP Plus Package-2 OBDSTAR X300 DP Plus Package-3 OBDSTAR X300 DP Plus Package-4 OBDSTAR X300 DP Plus Package-5
www.uobdii.com

UOBDII All rights reserved OBDSTAR X300 DP plus VS X300 DP VS Lonsdor k518ise

Benz W215 W220 all keys lost by CGDI MB+CG Pro
Category: General
Tags: CGDI MB CGDI

Mercedes Benz W215 W220 all keys lost, how to program new keys because the job can’t be done via OBD? What you need is one CGDI MB Mercedes Benz key programmer and one CG Pro 9S12 

 

CGDI MB + CG Pro program Benz W215 W220 all keys lost:

Guide:

1.Check the EIS style and the chiptype.

         Chassis: W220/W215

         EIS Mark: 4J74Y

         Symptom: Lost all keys, can’t start car.

cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-01

cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-02

2.Open CG-Pro software, click on “Benz” -> “Anti-theft” -> “EIS 220/215 (HC08)”, follow the built-in wiring diagram to operate.

cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-03 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-04

3.Confirm the adapters are connected well to the CG Pro, computer and the car, then click on “Read”, save the original data, disconnect the cable and restore to the original.

cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-05 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-06 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-07 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-08 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-08

4.Open CG-MB software, load the data read out by CG-Pro, do not modify the file name and then save.

cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-08 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-11 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-12 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-13

5.Click on “Generate EE”, load the EIS data that was saved before, check the info is correct, click on “Generate key file”, new create folder to save the data.

cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-14 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-14 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-16 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-17

6.Finally click on “Read & write key”, put the new key into CG-MB device coil, read out the data and erase it. Again open one unused key position key, click on “Write”.

cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-18 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-19 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-20 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-21 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-22 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-23 cgdi-mb-cgdi-pro-program-w215-w220-all-keys-lost-24

7.Install EIS back to the car, insert the new key into the EIS, learn key and program key succeed.

 

www.uobdii.com

Newest OBDSTAR X300 DP Plus ECU Clone Function
Category: General
Tags: OBDSTAR X300 Plus

Recently,OBDSTAR company have released their newest product called OBDSTAR X300 DP Plus(OBDSTAR X300 DP PAD2).It can clone ECU,so here i will introduce this function in detail.


OBDSTAR X300 Plus ECU Clone Function:

ECU Clone
1. ECU Clone, means ECU duplication.
The device copies all the data from the original vehicle ECU, and then writes all data copied into ECU with the same hardware to realize the same ECU function with the original vehicle.

2. Clone directly when replacing a new or a used ECU!
Without online matching in 4S store or removal of ECU bonding wire for reading and writing! Directly write without dismantling OBD!

3. Three features for ECU Clone:
A. Free of 4S online:
break monopoly from 4S, benefiting automobile maintenance industry
B. Simplified operation procedures: realize foolproof operation
C. Non-dismantling with zero risks: read and write data without dismantling ECU

src:http://www.uobdii.com/wholesale/obdstar-x300-dp-pad2-key-master-plus-full-configuration.html

Which Range Rover Key Programmer is Best for You?
Category: General
Tags: Mart tool

It is necessary for auto locksmith to get a useful Range Rover key programmer.So here China OBD want to share some powerful device work on Range Rover keys programming.
 

Mart Tool Key Programmer
 

Mart Tool is designed to add new keys and program new keys when all keys lost for Land Rover and Jaguar KVM keys with Number FK72 HPLA.

JLR SDD Multi Function Tool

New Arrival JLR SDD/ TOYOTA/ VOLVO Diagnostic/Programming/Matching Key Multi Function Tool.Support JLR / TOYOTA / VOLVO . powerful , portable ,convenient and multi-language.For diagnostic , programming and matching key , SDD+ can directly match the account of original VCM diagnostic tool.

JLR SDD2 V149 Diagnose and Programming Tool

JLR SDD2 Support Landrover and Jaguar diagnostics, vehicle reprogramming, immo and smart key functions, which work on both Land Rover & Jaguar. JLR SDD Coded Access Password is able to used together with any JLR Diagnostic tool with SDD software. It is used for vehicle parameter programming. This offer comes with 100 times / tokens, after used up, you need pay again for use.

How to fix Carprog Clone LIB File Problem
Category: General
Tags: carprog full carprog

Here is the working solution on Carprog clone “LIB file problem” by re-flashing Mcu ARM AT91SAM7S256 step by step.ECU Programmer

Problem:
Any work solution for carprog v8.21 clone?
“Lib file problem. delete LIB file and make Update>-Internet”
 


Solution:
Yes, reprogram ARM with any jtag programmer.

Reflash Carprog MCU ARM by Jtag:
We need the stuff:
1- AT91SAM7S256.bin
2- Jtag programmer
3- Jtag software
We need to prepare the Carprog to connect to Jtag programmer but first the flash need to be erased, the Jtag function in mcu is disabled, you can’t connect to the mcu before erase the flash. Remove the AT88SC eeprom from the board, please note where is the pin 1 in eeprom before remove:
 


Carefully lift the pin 55 (reset) of the mcu and solder a wire and secure it with a small amount of silicone (you don’t want to broke the pin in the process).
Connect the Carprog (with the pin 55 disconnected) to the 12v supply, wait about 10 seconds and connect the wire from pin 55 to Vcc (3.3V) in Carprog:

 



Wait from 5 to 10 seconds after connect the 12v supply, the flash content will be erased and the Jtag option of the Mcu will be enabled now. If not work leave connected for about 3 to 5 minutes. Disconnect the 12v supply from CarProg full  and remove the pin 55 wire from vcc. The pin 55 must remain disconnected until the programming process is done.
Ok, that’s it. I make it; and you try on you risk.
Article from:http://carprog-carprog.blogspot.com/2016/10/how-to-fix-carprog-clone-lib-file.html

How to Cut TOY43 Key using Condor XC-Mini Find Bitting
Category: General
Tags: Condor XC-Mini

OBD2 engineer  teach you how to use Xhorse Condor XC-Mini cut keys if parts of the car are missing bitting on door lock/trunk lock/ignition lock.

 SEC-E9 Key Cutting Machine
Step1: Select Car information
Connected to the power supply, open Condor XC-MINI
Enter main interface, Click on ‘Find Bitting’
xhorse-condor-xc-mini-find-bitting-1
Select car maker ‘’Toyota’ Key cutter Machine
xhorse-condor-xc-mini-find-bitting-2
Enter ’TOY43’ and click on ‘Confirm’
xhorse-condor-xc-mini-find-bitting-3
Select key type and click on ‘Confirm’
xhorse-condor-xc-mini-find-bitting-4
Enter known bitting ‘23112134’
Enter unknown bitting as ‘?’
xhorse-condor-xc-mini-find-bitting-5
(Possible key bitting will be listed. Note that system has sorted the codes by the most
economical way in order to save blank keys. For example, the bitting under ‘First key’ only
needs three blank keys, the bitting under “Second Key” need another three blank keys, then the ‘third Key’…)

Step2: Prepare Key
Then push M1 clamp and tighten the clamp lock
xhorse-condor-xc-mini-find-bitting-6
Next put the blank TOY43 key on the M1 clamp and tighten it
xhorse-condor-xc-mini-find-bitting-7
Close the protective shield

Step3: Begin cutting
Click on ‘Find Bitting Code’
xhorse-condor-xc-mini-find-bitting-8
And click on ‘Cut’
xhorse-condor-xc-mini-find-bitting-9
It is processing…
xhorse-condor-xc-mini-find-bitting-10
Cutting complete!
xhorse-condor-xc-mini-find-bitting-11
You can clean up the clamp, probe and the cutter using the brush.

Article from:http://chasencai.over-blog.com/2018/06/how-to-cut-toy43-key-using-condor-xc-mini-find-bitting.html

CGDI MB Do All Keys Lost Programming for Benz W166
Category: General
Tags: CGDI MB

Mercedes Benz W166 all keys lost and program new keys, CGDI MB Pro is good choice, here share user manual with pictures.
 CG Pro 9S12
Guide:
Select Lock(EIS)
cgdi-mb-w166-all-keys-lost-01

Click on “Read EIS data” then “Computer password”
cgdi-mb-w166-all-keys-lost-02

Click on “Copy key without key” then “Collect Data”.CG100 Programmer
cgdi-mb-w166-all-keys-lost-03

Prepare to collect data, please wait…
cgdi-mb-w166-all-keys-lost-04

Please insert the simulation key into the lock in 30 seconds.
cgdi-mb-w166-all-keys-lost-05

CGDI MB programmer is collecting data.
cgdi-mb-w166-all-keys-lost-06 cgdi-mb-w166-all-keys-lost-07

Data acquisition succeed, save it by default.
cgdi-mb-w166-all-keys-lost-08

Click on “Upload data” then open the data you saved.
cgdi-mb-w166-all-keys-lost-09

Upload data successfully.
cgdi-mb-w166-all-keys-lost-09


Click on “Query password”
cgdi-mb-w166-all-keys-lost-11

Wait for 2 minutes, query password succeed.
cgdi-mb-w166-all-keys-lost-11

Click on “Lock (EIS)” then CGDI MB display password, copy it.
cgdi-mb-w166-all-keys-lost-13

Click on “Paste password”http://handybaby.spruz.com/
cgdi-mb-w166-all-keys-lost-14 
Article from:http://blog.cgdishop.com/how-to-use-cgdi-mb-do-all-keys-lost-programming-for-benz-w166/

How to Perform BMW FEM/BDC Key Learning by CGDI BMW
Category: General
Tags: CGDI BMW

CGDI BMW FEM BDC key learn is in the dismantling method instead of OBD method. Then you have to know the FEM/BDC system location, 95128 IC location, 95256 IC location and Key learning position, read the detail in the below parts.
 CGDI Shop

  1. BMW FEM/ BDC installation location.

bmw-fem-bdc-key-learn-01
CGDI Benz Programmer

  1. 95128 IC location

bmw-fem-bdc-key-learn-02
 

  1. 95256 IC location

bmw-fem-bdc-key-learn-03

  1. Key learning position

bmw-fem-bdc-key-learn-04

That’s all.

Value bundle:
CGDI Prog BMW MSV80 plus BWM FEM/BDC Authorization.

Xhorse VVDI Prog, Xprog and R280 Read BMW cas4 5M48H
Category: General
Tags: VVDI2 VVDI Prog

Reading BMW cas4 5M48H, the optional working programmers are Xhorse VVDI Prog, Xprog 5.5, Xprog 5.6, Xprog 5.7, R280 plus and Smok, etc.

Option 1: VVDI Pro read cas4 5M48H
Xhorse VVDI Pro can read and write 5M48H.
Here how to read 5M48H using Xhorse VVDI Prog.

Procedure:
Video demo: https://www.youtube.com/watch?v=ZWrQdha-OO8&feature=youtu.be
Open VVDI Pro software, select type, manufacture and model as MC9S12XEP100)
vvdi pro options-01
Click “Wiring Diagram”
Maximize wiring diagram: right click and select “zoom window”, then pull down window.
Follow the wiring diagram to connect CAS to the VVDI Pro.
wiring-diagram-02
Start to connect the cable.Car Key Programming Guide
connect-the-cable-03
The left zone is done, next is to do the right zone.
connect-the-cable-04
In this wiring diagram, it only need to remove one 0 ohm resistor to read out data, but one CAS ECU structure is different another one, some needs remove more electronic parts; we will show how to do in the other videos.
remove-one-0-ohm-resistor-05
Next is to remove this 0 ohm resistor.
remove-this-0-ohm-resistor-06
Wiring is done, 0 ohm resistor is removed
Finish-connecting-the-cable-07
Plug adapter into VVDI Pro.
Plug-adapter-into-VVDI-Pro-08
Close wiring diagram.

Select “New” – “ Read”
You see it is reading data very fast.
Reading data successfully, click “Save”
reading-data-successfully-09
Next is to check data.
Open the data, drag the mouse to check, okay, data is all read out, close it.

Option 2: XPROG-M V5.55, XPROG-M V5.70 and XPROG-M V5.60
Compared with XPROG-M lower version, XPROG-M V5.55, XPROG-M V5.70 and XPROG-M V5.60 add adaptor for 5M48H P-Flash, and already tested successfully by many ECU tunners.
xprog-m-v555-with-usb-dongle-new
Option 3: R280 Plus CAS4+ BDM programmer for MC9S12XEP100 chip (5M48H/1N35H) 
Top 5 features:

  1. R280 Plus, a powerful Motorola microcontroller dedicated programmer, supports the latest BMW Motorola MC9S12XEP100 chip (5M48H/1N35H).
  2. It supports automatically search mileage address and display the mileage
  3. Remove the chip, directly input the number of kilometers, the data is visible and can be arbitrarily edited, it allows user to arbitrarily read and write /P-FLASH D-FLASH data.

In a word, R280 plus features a powerful, decryption security, becoming the automotive computer repair, data recovery, data transfer and other professional electronic maintenance engineer.

  1. The latest generation of processor programmer.
  2. Using the latest software and hardware, hardware security level is high.


Powerful R280 Plus Update: Support for the upgrading of programming tools, to provide 24 hours of technical support, product 1 years warranty free upgrade.

Powerful R280 Plus microcontroller dedicated BMW Motorola programmer supports following models:
BMW 1 series – F20, F21 chassis – 2016 years ago
BMW X1 series – E84 chassis – 2016 years ago
BMW 3 series – F30, F31 and F35 chassis – 2016 years ago
BMW X3 series – F25 chassis – 2016 years ago
BMW 5 series – F10, F11 and F18 chassis – 2016 years ago
BMW X5 series – F15 chassis – 2016 years ago
BMW 6 series – DMEM/F12 F13 chassis – 2016 years ago
BMW X6 series – F16 chassis – 2016 years ago
BMW 7 series – F01, F02, F03, F04 chassis – 2016 years ago
BMW GT series – F07 chassis – 2016 years ago
BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.).
BMW EWS4 (2L86D).
EZS (1J35D/2J74Y/4J74Y/0L02M/1L02M/3K85K/3K91D/1L85D/1L59W/3L40K/4L40K, etc.).
Support for a variety of SRS computers
(9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K79X/5H55W, etc.).
Support M35080 series quick wipe, read and write (35080/35080-V6/35080-VP/080D0WQ/160D0WQ/35160, etc.).
FLASH 0K50E online write.

Have an overview on R280 Plus Software Display:
r280-plus-cas4-10 r280-plus-cas4-7 r280-plus-cas4-6 r280-mcu type r280 ic select r280 ic select-02 r280 d flash read

OBDSTAR H108 to Calibrate Citroen Cluster via OBD
Category: General
Tags: OBDSTAR H108

Used OBDSTAR H108 to do Citroen cluster calibration via OBD perfectly and easily, what I need to do is do what the screen display tells me to do.
 OBDSTAR X300M Mileage Programmer
Plug OBDSTAR H108 to the Citroen BSI. OBDSTAR
obdstar-h108-citroen-cluster-calibration-01
Select"Cluster Calibrate".
obdstar-h108-citroen-cluster-calibration-02
Citroen
obdstar-h108-citroen-cluster-calibration-03 obdstar-h108-citroen-cluster-calibration-03 obdstar-h108-citroen-cluster-calibration-05
Select "BSI".
obdstar-h108-citroen-cluster-calibration-06
Auto select
obdstar-h108-citroen-cluster-calibration-07
If auto select failed, select "manual select".
obdstar-h108-citroen-cluster-calibration-08
Select "JC BSIO4EV-KOX".
obdstar-h108-citroen-cluster-calibration-09
Switch ignition on
obdstar-h108-citroen-cluster-calibration-10
Select "Read EEPROM".
obdstar-h108-citroen-cluster-calibration-11 obdstar-h108-citroen-cluster-calibration-12 obdstar-h108-citroen-cluster-calibration-13
Please enter a filename to save, press the "ENT" button.
obdstar-h108-citroen-cluster-calibration-14
Operation success
obdstar-h108-citroen-cluster-calibration-15
Press the "ENT".
obdstar-h108-citroen-cluster-calibration-16
Read Flash...
obdstar-h108-citroen-cluster-calibration-17
Press the "ENT" button.
obdstar-h108-citroen-cluster-calibration-17
Read Flash success.
obdstar-h108-citroen-cluster-calibration-19
Press "ENT".
obdstar-h108-citroen-cluster-calibration-20
Press "ENT".
obdstar-h108-citroen-cluster-calibration-21
Press "ENT".
obdstar-h108-citroen-cluster-calibration-22
Input a new value.
obdstar-h108-citroen-cluster-calibration-23 obdstar-h108-citroen-cluster-calibration-24
Success.
obdstar-h108-citroen-cluster-calibration-25 obdstar-h108-citroen-cluster-calibration-26
Done.
Perfectly, I am very happy with this OBDSTAR H108, it doesn't let me down. I highly recommend it.
http://www.keycuttingmachine.org

RSS

Blog Categories
Recent Comments
"Where do we get real tech support and instructions?"
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner
"I have a X-100 pad just bought it. It scans well however the key..."
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner

This website is powered by Spruz