This blog will introduce you how to use EL-50448 GM TPMS Relearn Tool to relearn TPMS sensor for Chevrolet Avalanche 2011. (To reset the TPMS light) Check below parts:
What is this special TPMS tool EL-50448 OEC-T5?
EL-50448 OEC-T5 is a professional TPMS reset tool for ALL GM cars and easy to use! With EL-50448 OEC-T5 you can do TPMS relearn by yourself instead of paying for car dealer!
How to use EL-50448 TPMS reset tool to do GM vehicle TPMS relearn?
For example a Chevrolet Avalanche 2011 with TPMS light on when ignition on. (Tire PSI cannot show)
Because car TPMS system will not automatically recognize new tires after change new wheels and tires.car repair
First you need to press the parking brake pedal.
Next you turn car key to position “ON”. Make sure car is in TPMS learn mode.
Then get out of car. Remember to roll down car window in case you were locked out.
Hold EL-50448 TPMS reset tool close to the valve stem. (You should orderly start from left front → right front → right rear→ left rear)
After that EL-50448 relearn Chevrolet Avalanche TPMS successfully! Go back to car and you can see now the Front Tire PSI is 41 and the Rear Tire PSI is 41.Auto repair
P.S We also tested EL-50448 OK to relearn TPMS for 2012 Chevrolet Cruze, 2016/2017 Chevrolet Camaro… Get EL-50448 TPMS reset tool only $49.99 free shipping from uobdii.com!
From UOBDII Official Blog, post How to use EL-50448 GM TPMS Relearn Tool for Chevrolet Avalanche?
XTUNER E3 WINDOWS 10 Wireless OBDII Diagnostic Tool Pefect Replacement For VPECKER Easydiag.
XTUNER E3 Diagnostic Tool Vehicle Model List:
US domestic: CHRYSLER, FORD, GM, JEEP, SCION, etc.
European: ABARTH, ALFA, ASTON, AUDI, BENTLEY, BENZ, BMW, BUGATTI, CITROEN, DACIA, FERRARI, FIAT, FORDEU, JAGUAR, LAMBORGHINI, LANCIA, LANDROVER, MASERTI, MINI, OPEL, PEUGEOT, PORSCHE, RENAULT, SAAB, SEAT, SKODA, SMART, VAUXHALL, VOLVO, VW, etc.
Asian: ACURA, ASIAGM, DAEWOO, DAIHATSU, HONDA, HYUNDAI, INFINITI, ISUZU, KIA, LEXUS, MAZDA, MITSUBISHI, NISSAN, PERODUA, PROTON, SSANGYONG, SUBARU, SUZUKI, TOYOTA, etc.
Australian: HOLDEN and FORD (AUSTRALIA).
China: BYD, CHANGAN, CHANGHE, CHERY, EMGRAND, ENGLON, FOTON, GEELY, GLEAGLE, GWM, HBSH, HUACHEN, LIFAN, WULING, YUAN, etc.
OBDII vehicle: CHRYSLER, FORD, GM, TOYOTA, LEXUS, HONDA, HYUNDAI, KIA, MAZDA, MITSUBISHI, NISSAN, SUBARU, SUZUKI, ABARTH, ASTON MARTIN, BUGATTI, FERRARI, LAMBORGHINI, MASERTI, BENZ, BMW, VW, AUDI, SEAT, SKODA, PORSCHE, JAGUAR, LANDROVER, VOLVO, SAAB, ALFA, etc.
More information about XTUNER E3:http://www.uobdii.com/wholesale/xtuner-e3-wifi-obd2-diagnostic-tool.html
OBDSAR F101 OBDSTAR F101 Features is appropriated for remote, programming Auto Keys and smart key of TOYOTA vehicles. It's easy to carry, and its appearance is designed elaborately.
●Multi-language environment can be applied in different countries and regions.
●The main unit system adopts ARM high speed chip to keep it running fast, stable and anti-jamming.
●Upgrade via TF card at any time.
OBDSTAR F101 Features:
1. Support 4D(67,68) chip immobilizer reset(All keys lost).
2. Support 72 chip(WITH G,EUROPE) immobilizer reset(All keys lost).American TOYOTA with G key Reset will upgrade soon!
3. Support smart key reset before 2009(All keys lost).
4. Add/erase Keys for all of TOYOTA cars.
5. Add/erase smart keys for all of TOYOTA cars.
6. Add/erase remotes for most of TOYOTA cars.
7. No need to connect with computer, plug and play, automatic transfer.
8. No need to buy tokens.
9. One Key Upgrade
10. Have good man-machine interaction.
More info about obdstar f101 pls visit:http://www.uobdii.com/wholesale/obdstar-f101-toyota-pin-code-reading-and-key-programming-tool.html
XTUNER X500 Function list:
1.ABS Bleeding Reset
7.Immobilizer & Key Reset
XTUNER X500 Feature
1.Powerful multiple functions like OILRESET, DPF, BATTERY, ABS BLEEDING, EPB, TPMS, IMMO&KEY, INJECTOR, covered most of brands including American, European, Asian, Australian and Chinese vehicle makes.
2.Unparalleled OBDII supporting capability for all 5 OBDII protocols and 10 testing modes.
3.Hardware architecture uses a brand-new design for such protection functions as interference and stability. Built-in over voltage protection module is available, in order to protect scanner and vehicle against accidental damage during checking.
4.Stable and smooth working in high and low temperature environment.
5.Convenient and timely online software updating on the internet.
6.Support the open source processing system on the cellphone Android system above 4.4 version.
7.Perfect easy-to-use characteristic with touch-screen and intuitive operation.
More information about XTUNER X500 pls visit:http://www.uobdii.com/wholesale/xtuner-x500-with-multi-functions.html
Digimaster 3 has much bigger
touch screen than digiprog 3
Deutsch, English, Espanol,
In what way
to change mileage
|Both by OBD2 or dashboard
Original and update online
by usersanywhere anytime,
and one year free update
Users are not allowed to
update by themselves.Our
engineer program update files
according to users’ machine
serial number, then send to users to update.
best odometer tool for universal car, such
as it can change mileage for ford, BMW,
Toyota, Benz, VW, Audi, Volvo, Renault.
Odometer tool for universal
car, but cover less vehicle
models than digimaster 3,
digiprog 3 cannot do well in Ford,
Benz, BMW, Opel that digimaster 3 can do.
Generally speaking, digimaster3 cover
vehicles from 1996-2014, the vehicle
year it covers differs one from the
other based on specific vehicle.
Digiprog3 cover vehicles
from 1996 to 2013, the vehicle
year it covers differs one from the
other based on specific vehicle.
Item No.SP78 no token limitation,
Item No.SP78-B with 980 Tokens
|No tokens limited
odometer correction, Audio
engine ECU resetting,IMMO,
programming key for Benz &BMW etc
Mainly for setting and
programming digital speedometer.
||Digimaster 3 quality is better than Digiprog 3
Tihs article is about Toyota Diagnostic Tool,we share top 3 hot diagnostics for Toyota.
1 Toyota MINI VCI cable
2 Denso Intelligent Tester IT2
3 VXDIAG VCX NANO for TOYOTA
The top 3 hot Toyota diagnostic interfaces is based on scientific analysis of many websites, including uobdii.com, obd365, eobdtool…
TOP 1 – mini vci Techstream cable ($26.99)
– Cheap Xhorse-made knock-off
– Popular Techstream 10.10.039 (tested by thousands of users)
– High reliability using SMD chip, and certified by CE and FCC
– ALL communication protocols supported for Toyota (1996 – latest):
K-Line ISO 9141/KWP 2000 ISO 14230-4/SAE J1850 PWM/SAE J1850 VPW/CAN 2.0B ISO 11898 /CAN ISO 15765-4
The knock off cables use 1.4.1 or 1.4.6 (latest). The “real” cables use 2.0.1 or 2.0.4 (latest). They are all fake of course but the good fakes use the same firmware as the real Xhorse cable. The 1.4.1 firmware does not support active tests. The cable will work on 10 year old Toyotas like some in the GS forum have said but they will not work on the 2011 Prius as some on PriusChat have said.
TOP 2 – Intelligent Tester ITII ($285)
– Newest version: 2016.7
– Multilanguage: English/ German/ French/ Spanish/ Italian/ Chinese
– More accurate diagnosis through CAN communication for 16pin Toyota (1996 – 2010 better):
– Speed: 50 times faster than the conventional
– Easy operation: touch panel 5.7 inch full color LCE display
TOP 3 – VXDIAG VCX NANO for TOYOTA ($89)
– better hardware design than mini vci and Denso IT2
– multi-system: WINDOWS XP and Windows 7/8/10
– multilanguage: Chinese, English, French, Italian, Spanish, German, ect.
– WIFI wireless connection
– 12V and 24V communication
– model: diagnostic test for heavy truck and diesel models till 2016
– VCX is a standard Passthru programming tool, which can do online ECU programming
Mini vci cable is more suitable for the green hand to do basic diagnosis
Denso IT2 is ideal for technicians because of its high speed during operation
VXDIAG NANO for Toyota at a reasonable price, is the best choice for individual users and professional repairing men with better hardware design and powerful function (ECU diagnosis & programming, ke
What is the software of choice for diagnosing BMW? I realize that people have different needs so here I will enumerate three bmw diagnostic tools to offer reference for you.
1st choice: BMW INPA K+CAN With FT232RQ Chip with Switch
- Works on BMW with 8 pin and with K-LINE protocol
- Features: Read and delete errors, Adaptations, Driver programming, Applu coding, etc…
- Supports Protocols:
- Fast magisterial D-CAN and PT-CAN (500 kbit/s)
- Slow magisterial K-CAN (100 kbit/s)
- Standard BMW protocol (BMW OBD interface).
- INPA is a diagnostic interpreter program that communicates with your car usingBMW’s own factory developed Electronic Diagnosis and Information protocol (EDIABAS). INPA is a powerful and comprehensive diagnostic tool but there is no simple handbook available that I know of which will comprehensively explain its operation or functions. The bottom line with INPA is if you do not understand what a particular function does, you are probably better off leaving that function alone, but having said that, the level of diagnostic functionality is truly exceptional.
2nd choice: BMW Carsoft 6.5 ECU programmer
- Features: Service interval reset, component activation, live data, LCM reading, sync. EWS and ECU, adaptation values, and coding.
- Supports Vehicles:
E30, AB From 1998, E36, KOMBI Except kompakt, ZKE From 1994, ZVM Till 1994, E46, Z3, E34, KOMBI From 02/98, E39, E53-X5, E32
- Carsoft is designed to allow home-mechanics to read and erase fault codes and reset service intervals. It has the capability to access most modules in your car including airbags, can display live engine data on post 1996 models and test components such as power windows and central locking.
3rd choice: BMW EDIABAS OBDII RS232 Interface
- EDIABAS can accomplish virtually any programming/diagnostic or coding function, but since it is only a computer protocol, requires seperate programs to interface between the user and EDIABAS so that it can receive and trasmit instructions. For example INPA communicates with EDIABAS to perform diagnostics, NCS to perform coding and NFS to perform programming functions. NCS and NFS are not particularly user-friendly and require fairly intimate knowledge of BMW systems to use. If used incorrectly, programs which communicate via EDIABAS have the potential to destroy computer modules, making replacement the only viable option.
From UOBDII Official Blog, post Making choices of INPA, Carsoft, EDIABAS as BMW Diagnostic Tool
BMW key lost or need a clone? which BMW key programmer to use?
When you plan to buy a BMW key programmer online, have you wonder which key programmer do I know? Have you ask yourself or your friends like this “among these BMW key programmer supplied by the seller, which one should I buy”?
In the following parts, I will list some BMW key programmers, and generally tell you their similarities and differences.
AK90 Key Programmer AK90+ For All BMW EWS
Newest AK90 BMW KEY-PROG V3.19 is a safe and effecitive key match tool for BMW EWS system. It covers EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4,can read all EWS key information from 1995-2005.
1. Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.
2. With the help of software you can renew , lock or unlock keys as well.
3. Programming original chips “EML 10030A” for making keys .
4. Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews.
BMW CAS AK300 AK300+ V1.5 Key Maker
AK300+ BMW CAS Key Maker (Support in 2002 -2009 years) especially for BMW CAS system key programmer.Support new BMW CAS,CAS2,CAS3,CAS3+. Automatic analysis CAS data,easy to match keys.
AK300 highlights in features and functions:
Language: English, Chinese
Operation System: Windows XP
Car Coverage: BMW 2002 -2009 Year
Firmware Version: 1.16
Software Version: 1.50
Support new BMW CAS,CAS2,CAS3,CAS3+. Automatic analysis CAS data
1 BMW CAS supports a diagnosis of communication directly through the OBD port or through the CAN BUS port security to read and write data EEPROM;
2 automatic analysis CAS data, automatically displays the BMW keys to use quantity; key tooth number; remote control frequency; CAS with the DME synchronization ID; keys scrapped the state, etc.;
3 supports key scrapped or restart using the old key; this technology unmatched global technology;
4 supporting the rehabilitation of CAS computer (due to transfer table is damaged or programming lock);
5 supports the new 2002-2009 BMW CAS; CAS2; CAS3; CAS3+
6 support the horse CAS; CAS 2; CAS 3; CAS 3 + BMW and BMW remote key.
HiTag2 V3.1 Programmer
HiTag2 v.3.1 programmer is universal key programmer, with additional options of key programming from dump and PIN extraction. Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do everything automatically.
1.BMW (CAS1/2/3/3 +) at 912/9S12 immo + remote control, editing, KM, VIN, reading data from the key, read / write eeprom of the transponder, reading data from remote
2.AUDI (Kessy) on 93C66 immo + remote, read PIN, edit VIN number and immo
3.VW (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo
4.PORSCHE (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo
5.BENTLEY (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo
6.CHRYSLER (State) on the 95040/95080 immo + remote, read PIN, VIN Edition
7.LAND ROVER (EWSх) to immo 9S12, editing VIN
8.NISSAN (NATS) at 95,080 immo
9.OPEL (CIM) in the 9S12 immo + remote, read PIN, VIN Edition
10.RENAULT (UCH) on 93C66 immo + remote, read PIN, VIN Edition
11.SAAB (CIM) for the 93LC66 immo + pilot edition of the VIN
1. Latest versions of HiTag2 transponders are fully supported.
2. Widest range of supported cars, using HiTag2 protocol.
3. Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality!
4. Correct BMW keys programming – RADIO REMOTE is working.
If you want to know more about BMW key programmer,you can visit our online shop uobdii.com.
|OBDSTAR X300 DP tablet Key Programmer
not only play with programming keys but also some special functions like program ECU , read Pin code, adjust Mileage etc. Really a higher level diagnostic tool for workshop or dealer.
Here is step by step procedure of changing mileage for Cadillac ATSL 2016.
-Cadillac ATSL 2016
Connect X300DP with vechile and open X300DP
Press on START button
Step2: Choose vehicle information
Choose “Mileage adjust” option and click on GM
Choose GM V30.45 to go on
Then choose Cadillac
Mileage adjustment (correction)
It is communicating...
Step3: Adjust mileage
The current mileage information
Input the new mileage and press ENTER to continue
It is communicating...
The mileage value at presant
Done! Successfully change mileage for Cadillac ATSL 2016
More info about OBDSTAR X300 DP,pls visit: