Blog Entries
Free download full INPA software with BMW F and E series
Category: General
Tags: bmw icom bmw inpa obd2 cable

It’s a full BMW INPA software for F and E series models. Wish this helps.
bmw-inpa-k-can-with-ft232rq-chip-6
Free download
BMW Standard Tools and INPA 5.0.6
https://mega.nz/#F!atxDATqT!r6SO9Wu75GuDJmpbTTO48Q (unknown security)
INPA 5.0.2 software
https://goo.gl/lLcoVc (tested without issues, safe to use)

BMW Standard Tools 2.12 – Install First
icom-a2-b-c-with-wifi-for-bmw-1

  • Includes (EDIABAS v.7.30, Tool32 v.4.03, INPA v.5.06, WinKFP v.5.31 & NCS Expert v.4.01).

INPA_Fxx_v.2 – Install Second

  • Copy INPA_Fxx_v.2 folder to C:\EC-Apps\INPA_Fxx_v.2 and EDIABAS to C:\EDIABAS overriding existing EDIABAS Folder.
  • Run INPALOAD.exe from INPA_Fxx_v.2 BIN folder (C:\EC-Apps\INPA_Fxx_v.2\BIN\INPALOAD.exe).
  • Note: DISABLE WINDOWS FIREWALL ANY ANY VIRUS SOFTWARE.
  • Note: For Exx connection, you will need to change EDIABAS.ini file to “INTERFACE = STD:OBD” and edit OBD.ini Com Port settings accordingly to match you PC’s Com Port settings.


Note: software from customer share at http://cartechnology.co.uk/. TRY ON YOUR OWN RISK!

Reference:
How to setup BMW Standard Tools on Windows 7 32bit
How to install INPA NCS-Expert WinKFP on Windows 10 64bit


Article from: http://blog.uobdii.com/free-download-full-inpa-software-with-bmw-f-and-e-series/

Which Auto key programmer best for American and Asian cars?
Category: General
Tags: obdstar x100 pro skp-900 tango

Are you confused about which Car Key Programmer is best for American and Asian cars? This blog will recommend three key programmers with different prices: OBDSTAR X-100 PRO, SuperOBD SKP-900 and Tango programmer. The details are as follows:

 

Here you will start from learning OBDSTAR X-100 PRO, SuperOBD SKP900 and Tango programmer separately, then user feedbacks on these three tools, then a short conclusion at last.

 

OBDSTAR X-100 PRO Auto Key Programmer for American and Asian cars

american-asian-car-key-programmer-obdsatr-x100-pro-1

Price: $339

X100 PRO C+D Type function: Immobilizer remote match+ Odometer+ OBD Software

 

OBDSTAR X-100 PRO Programmer supported car list:

http://blog.uobdii.com/obdstar-x100-pro-key-programmer-car-model-list/

 

OBDSTAR X-100 PRO Highlight:  Support EEPROM Function (EEPROM Chip read and Immobilizer initialization)

Note: It doesn’t support Toyota G Chip and Proton.

 

What about OBDSTAR X-100 PRO update?

OBDSTAR X-100 PRO update free online on official website for 1 year.

 

SuperOBD SKP-900 Key Programmer for American and Asian cars

american-asian-car-key-programmer-superobd-skp900-2

Price: $539

SKP-900 can support almost all cars in the world, such as Ford, Land Rover, Chrysler, Jeep, Toyota, Nissan, Honda, Mitsubishi, Hyundai, Kia, and so on.

 

SKP900 Key Programmer supported list:

http://www.uobdii.com/upload/pro/skp-900-supported-car-model.pdf

 

SKP-900 Key Programmer Highlights:

  1. It can program many car key without need for Pin Code. Besides, it can read Pin Code for many cars.
  2. It support TOYOTA G chip.

 

What about SKP-900 update and token issue?

  1. SKP-900 update free monthly.
  2. SKP-900 need tokens but it is free to add tokens.

 

Tango key programmer for American and Asian cars

american-asian-car-key-programmer-original-tango-3

Price: $1,029

 

What transponders Tango key programmer can do?

Philips Transponders, Temic Transponders, Megamos Transponders, Texas Transponders, Atmel Transponders.

Tango programmer’s features:

  1. It can read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
  2. It can produce working keys by EEPROM dump, identify transponders and clone keys.

 

Tango programmer’s supported car list/ transponder list:

http://www.sinodownloads.com/down/download/PDF/3511073-TANGO-featuresEn.pdf

 

What special functions Tango have? (Tango highlight)

  1. After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly, even on new FIAT CODE 2 system, also used in PSA Group vehicles! Only you have to write the new file back into the immobilizer system!
  2. Tango can read kilometers, VIN and transponder types.

 

What about Tango update and token issue?

  1. This Original TANGO Key Programmer with basic software update online free. (Now you can get Free Daihatsu G Chip Authorization support both write and copy at uobdii.com) You need to pay for authorization when add additional capabilities, special function or work it on special car model.
  2. TANGO Key Programmer doesn’t need tokens!

 

User feedbacks on OBDSTAR X-100 PRO, SuperOBD SKP900 and Tango:

 

Very good for Asian and American cars is SKP-900. But I also use Tango. Tango is excellent, but can’t do cars remote locking for example and is all for off car programming (needing XPROG etc)

 

I use X100 pro OBDSTAR. I'm very happy with it. Not perfect but very good!

 

I have x-100 pro and it’s nowhere near as good as SKP900, also Tango in my opinion is much better for off car programming. SKP900 has very good OBD coverage especially American cars. Tango is superb for all difficult and on the bench. Moreover Tango is very good at EEPROM Applications.

 

Conclusion:

There is no a perfect key programmer that can do all car keys in all occasions. But you can find a better one which is good and useful for your own usage. Hope this blog helps.

 

Article from SKP-900 Sit:http://skp900-auto-key-programmer.blogspot.com/2016/09/which-auto-key-programmer-best-for.html

 

FORScan scanner solve P1622 error code on Ford Focus 2008 EDC16
Category: General
Tags: Forscan scanner obd2 scanner

Actually I was a beginner of FORScan scanner, recently I got problem when using Forscan, I asked help on the forum and some kind friends offer me these answers.

 esl27-forscan-scanner-4

My Question: My Focus on a P1622 Immobiliser ID wrong and engine start but in safe mode. What are the often cases that exists on my ford car?

Forum member Answer: Instrument cluster (IPC) is primary PATS module for PATS on Focus Mk2, PCM is secondary. If IPC is replaced, keys should be programmed and IPC should be matched (paired, synchronized with PCM). If PCM is replaced, IPC new keys should not be programmed, just synchronized with the new PCM. So typical scenario is that user replaces IPC or PCM and has to program PATS after it. However, as usually, P1622 should not appear after IPC replacement. This sounds like a more serious problem with immobilizer. So it would be good to know what was replaced in PATS and why.

 

My Question: Can Forscan do the job?

Forum member Answer: FORScan should be able to program keys to IPC and pair IPC with PCM in case of normal ignition key PATS.

 

My Question: I have had an ELM327 adapter. Is it ok for working with Forscan?

Forum member Answer:

*Any good ELM327 should be ok.

* I bought a modified elm327 to work with forscan and it works well.

 

My Question: Is the P1622 code can be cleared with Forscan with pin code?

Forum member Answer:

Most likely the code cannot be erased unless the problem is resolved and source of it is removed.

 

Finally I want to confirm that if you have some troubles with Immo or CAN on focus TDCI 2008, you should VERIFY the cable behind the dash!!

It was defective and made troubles on CAN when in certain position…

Fix it with glue and start…. Good soft forscan works very well in HS/MS with elm modified.

BMW ICOM A2 NCS Expert change miles to km on BMW Z4 M3 X3
Category: General
Tags: bmw icom a1 bmw icom a2

Found lots of threads about BMW changing miles to km. Here i would share my experience of odometer programming.

icom-a2-b-c-with-wifi-for-bmw-1

I did a few changes on my Z4, M3 and X3 through ICOM A2 emulator running with NCS Expert.

Worked great!

I did on the Z4:
– open/closing Top with key
– Open/closing top doesn’t stop when start driving
– disabled belt beep.
– blinking lock/ unlock car
– LED in mirror
– disable Miami setting (locks close when faster than 15 km/h)
– full moon brake light when hard braking
– Brake-Force-Light. third brake light flashes when ABS kicks in.

As I remember there was a setting for miles and km/h. I need to check the SW_PSW.trc file.. I might have it in an old email

Xtool X100 PAD Tablet Key Programmer/diagnostic tool Feedback
Category: General
Tags: x-100 pad x100 pad xtool x100 pad Car Key Programmer

I have researched here and there for a great functional car diagnostic tool, finally I choose XTOOL X100 PAD, now I have received and I will tell you why I purchase it. Hope it offer reference for you.
These are photos of x100 pad:
xtool-x-100-pad-tablet-key-programmer-1 xtool-x-100-pad-tablet-key-programmer-2

Let’s begin to talk about it from the function. According to my research, X-100 PAD is a tablet with the latest technologies to perform key programming and you can use it to do these things:
*key programming
*Mileage adjustment
*Oil service light reset
*Timing belt service light reset
*Tire pressure warning light reset
*Reads keys from immobilizer’s memory
* PIN Code Reading
*EPB reset
*Throttle body reset
*DPF reset
*Battery reset
*Steering angle calibration
*OBD-II diagnosis
*and more
Very comprehensive function, according to some forum friends, these functions work well on Europe& US cars such as Audi, VW, Ford, Porsche etc. The price $449 is affordable for me. To think that most garages charge $400.00 just to scan my car, at the price I can scan my car and do much more job with this intelligent diagnostic equipment.

Next I will share my experience with you:
This tool should be activated before using, so you should input activation code, product serial number, nickname, login account (email address or cell phone number is OK) and password to activate it.
Note: each device has a serial number and activation code, like this:
xtool-x-100-pad-tablet-key-programmer-3
Then the system will then save it and the diagnostic application will start after activation, you need to study these function for some time.
This is special functions interface
xtool-x-100-pad-tablet-key-programmer-4
Exhaust Gas Treatment (DPF) Features interface
xtool-x-100-pad-tablet-key-programmer-5
EEPROM Adapter Features interface
xtool-x-100-pad-tablet-key-programmer-6
And I find an interesting function–-remote diagnosis
I no longer have to worry about how to operate, once I encounter problems and not able to solve them, I can open this application and ask for remote assistance.
If you need to use this, you should click Remote Diagnosis and open the TeamViewer interface. Generate and display device ID. Notice that your partner will also need to download and install TeamViewer. Finally inform your partner of your TeamViewer ID and password to enable them to begin remote access of X-100 PAD.

A summary, I am satisfied with this X100 PAD diagnostic tool, it helps me a lot on mileage adjustment oil reset, thanks it!

Article from XTOOL X100 PAD Site:Xtool X100 PAD Tablet Key Programmer/diagnostic tool Feedback

Copy 46 chip with SKP900 key Programmer and 46/4D/48 Adapter
Category: General
Tags: skp900 skp-900 skp-900 key programmer

SKP-900 Key Programmer is Hand-held OBD2 key programmer support almost all cars in the world. Here is the instruction on how to copy 46 chip with SKP900 and 46/4D/48 adapter, hope it helps.
46-4d-48-adapter-plus-for-skp900-1superobd-skp-900-1
 

  1. ConnectSKP-900 and 46/4D/48 adapter.

Plug the SKP-900 key programmer into the vehicle OBD socket.
That’s preparation to copy the original car keys and 46 chips.

  1. Choose Special features into the SKP-900 -> chip key copy-> 46 chip copy, which has four options, according to the order entered were 1-2-3-4.
  2. Firstly enter 1 and read original key ID, then place the original key near the adapter and press [YES], the original key ID will be read.

Note: If reading error, check if the key chip is 46, or adjust the position of the key and reading coil, and re-read the key ID. After reading key ID, press [NO] to return.

  1. Enter 2 to get collector information: place the collector already with collected data near reading coil (refer to the user manual for the collector user manual), press [YES] to go on. At this situation, the collector data indicator (green) will flash, the screen displays the collector data. Then press [NO] to return.
  2. Enter 3 and decode original chip, press [YES] to continue. The screen will display: working, please wait… It normally takes about 5-30 seconds. (Need about 4 minutes in some case). If the decoding failed, please re-collecting data and re-do step 3 and step 4. If the decoding successes, please press NO to return.
  3. Enter 4 and create clone chip, place the copy-able 46 chip near the reading coil, press [YES] to continue, copy successes 1 second later; if not, please adjust the position of the coil and chip, or replace the chip can be copied.

Article from:Copy 46 chip with SKP900 key Programmer and 46/4D/48 Adapter

RSS

Blog Categories
Recent Comments
"Where do we get real tech support and instructions?"
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner
"I have a X-100 pad just bought it. It scans well however the key..."
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner

This website is powered by Spruz