General
Xhorse VVDI2, VVDI Prog, VVDI MB tool Reviews
Category: General
Tags: VVDI Key Tool VVDI2

Xhorse electronics vvdi reviews here, incl xhorse the best:
VVDI mercedes review
VVDI Prog programmer review
VVDI2 programmer review
CGDIShop

VVDI MB Tool review

– cost-effective and powerful
vvdi mb can renew elv without soldering the nec while the other should sold out and not make via obd2, vvdi mb can renew EIS no need token even its bga eis , while others cannot , with small budget can program bga key with 6 minutes while with others you need 5 thousands dollars to do , more over for w204 all key lost no body in the world can do it while they are working on it with vvdi
xhorse-vvdi-mb-bga-tool-new-1
– 204 all keys lost ok
For 204 all keys lost one solution is to buy eis with key tested and ok

– W203 password calculation via IR
I read pass W203 IR OK

– W203 W220 read password ok
W203: EIS/EZS A203.545.05.08 – MCU ??? -read PSW IR – OK
W203: EIS/EZS A203.545.05.08 – MCU 1J35D – read PSW – OK
W220: EIS/EZS A215.545.02.08 – MCU ??? -read PSW IR – OK
– support older ESL
old ESL(motorola) are supported read through K-line yet……look in ESL menu, there are some possibility…

for me are all older ESL from 202, 203, 208,209,201,211 and so…then when in the adapter are socket for the 28-pin HC05E6 motorola, then are this supported too…
the emulator is too for all this OLD type of ESL…

– renew this namber 7G tronic 003 446 0310
Can renew this namber 7G tronic 003 446 0310
i have renewed 10 pcs of this part number, all success

– made a key to W203
I have made a key for W203.
Works great but the remote controle opens only the drivers door.

– Exchange W204 ESL without renew EIS
Exchange W204 ESL without renew EIS. In ESL Tools, write EIS with password(Select Auto clear TP and personalized) tested and work ok

– w204 w207 w212 all key lost work
All key lost:
W204 work
W207 work
W212 work


VVDI Prog Review

– read/write Fiat 9s12dg256b mcu without problem
Yesterday i read/write mcu 9s12dg256b from fiat bcm with vvdi Prog WITHOUT Problem
vvdi-prog-1
VVDI Prog secured very well
I work’s on opel astra h cim with hc912 mcu,
ford dashboard hc912, and with hc908az60
secured very well.

– 080dowq erasing works perfect
Now I tried 080dowq erasing, and it works perfect.

– R/W ok with CIM Opel Astra H
3L40K – Read ID (0113) ok, Rean EEP (ok) Read Flash (ok)
1L59W- Read ID (0115) ok, Read EEP (NOT) Read Flash (NOT).

Ps. 3L40K – Just that flash is smaller than It should be.
Read-it with smok, and You will understand what I am saying.

– 50/50 chance to Porsche BCM
I have tried to read Porsche BCM with 9S12 5M48H dated 2013 MCU but could not do it because VVDI Prog did not detected chip ID. Always get ID: FFFF
While Porsche BCM with MCU 9S12 2M25J dated 2014 have read without problems

– 209 flash ok
I received the vvdi prog and tested eis
209 with st12 eeprom flash ok

– vvdi prog read ok with W221
for w221 ism with ST10F269 read by vvdi prog OK with micromax diagram
for write it didn’t erase automatically you have to erase it before, then all OK .

–  ok with D70F3571
vvdi prog 4.5.1 D70F3571 read ok

– no issues with BSI 307 2002
BSI 307 2002 912DG128 – 3K91D
EEP (read and write) – OK
FLASh 4.000Mhz (read and write) -OK — Orange5 clone (DO NOT write flash)
Identical files Vvdi prog and Orange5, same EEP and FLASH.
Incircuit BSI photo of Orange5.

– vvdiprog + eeprom adapter without issues
works fine with eeprom adapter
does not work with test clip tried to different ones,
maybe i should try other one, if there is any higher quality,
or maybe because of cable length it doesnot work

– good at EZS, CAS2, CAS3, CAS3+ …
this programmer can read write EZS, cas2, cas3, cas3+, read other motorolas safe without any problems or damages

– work OK on BMW CAS4 F10 2014
Today tested: CAS4 with Motorola 1N35H mask from F10 2014!
d/p-flash BACKUP – ok
Crack chip security – ok
read/write p/d-flash – ok
Locked – ok
Works without heating the chip. Only removed 4 elements from the board, and after operations resoldered them back.
i have desoldered 4 elements from the board: transistor, capacitator, resistor and cristal/quartz.


– vvdi prog not working?:
– VVDI PROG CANNOT READ 68HC805 FOR IMMO MAZDA 323

– It cannot read hcx05 at all.

– Cannot support read pin code for psa and old chrysler



Xhorse VVDI2 review

VVDI2 BMW:

– CAS1 bmw read eeprom by obd
i did yesterday CAS1 bmw read eeprom by obd and got key info and cutting code
vvdi2-key-programmer-1
– bmw ews direct by obd
vvdi2 bmw can make key in bmw ews direct by obd or need read ews dump by programmer then make key

– program new keys to bmw e90 2008 USA
i have a vvdi2 with vag and bmw authroization
have to programmed new keys in bmw (bmw e90 2008 USA year), without keyless go
in original key inside transponder pcf7953 315mhz
My hint for you: Chinese keys work only transponder but remote need to remove cas and do it on bench on tango or xhorse vvdi, but obd method need always original for better chance chip is 7945 or 7953 which is 46 family good luck

– support MED17/EDC17 dump tool
Xhorse vvdi2 v1.2.1 adds support for MED17/EDC17 dump tool, support clone ECU(Menu->Special Function->MED17/EDC17 dump tool)
But sadly only work for Condor key cutting machine users
my vvdi 2 is full not basic.but function for edc17 only for condor cutter user.no for all vvdi2 full user
vvdi mb bga have the token system, if you have condor cutter 1 token in 1 day for free if you don’t have you need pay
it is different


VVDI2 AUDI:

– do Control head on A6
Vvdi2 able to do Control head on A6
need Transponder Sokymat Crypto 8E – Audi ID8E precoded by Component Security.
If you want to add remote key: 4F0837220AK, 4F0837220R, 4F0 837 220 – and others.

– key learn for Audi A4 RB8 crypto (2004+)
VVDI2 key learn procedure for Audi A4 RB8 crypto (2004+) option:
Just read the pin and cs from ecu.
Make backup from cluster, and the cluster configuration.
Then make a dealer key, and learn it with pin.

Audi A7 2012 km done
Audi A7 2012 km done by reading config by obd then read eeprom by Programmer ——– ok!

– Audi S8 spare key job done
Did one Audi S8 done successfully, spare key job

– add keys to AUdi a4 2009 BCM2
AUdi a4 2009 BCM2 key added successfully in 2 minuts.

Audi Q5 add keys, read bcm2
I did Audi Q5 add key ok, read BCM2 by OBD ok, read BCM2 by bdm ok.
Passat B6 all key lost by eep ok.

Audi A3 8P 434 not working
Remote programmer test remote for Audi A3 8P 434, not working.
Not file for Golf 5 434.
Test remote generator Ibiza 6J “1k0 …. N” 434 working.

Audi A4 2008 not working
VAG remote key adaptation does not connect to many old cars but usually works fine with newer “dealer keys”. However, Audi A4 2008 did not connect to car (BCM or BFM). Key programming ok.
On a side note: A4 2008 do not have BCM, models 2009 + has BCM.


VVDI 2 & others:

– Peugeot 308 2008 BSI JC pin extracted
Peugeot 308 2008 BSI JC pin extracted OK. Key learn failed – first key OK, second key failed. Tried several times. Job finished with other device.

Passat B6 read code and add keys
Passat B6 read Code from confort module (95320) & added key ok!

– 0D69J file identified
BENZ a class 0D69J file identified ok, but write transponder not work

– Passat B7 failed
Passat B7 Read Code from confort (95320) & add key by obd ——— Failed, (i made by transponder tool option)
VVDI Key Tool

Review on OBDSTAR X300 PRO3 Key Master
Category: General
Tags: OBDSTAR OBDSTAR X300 DP

At that time I was hesitated to purchase OBDATAR X300 PRO3 or SKP-900 key programmer to program smart key for my Ford car. Now I'm glad for my choice to X300 PRO3, of course I do not have bad reviews on SKP-900, it is also a powerful and professional diagnostic tool, but I think X300 PRO3 more suitable for me.
OBDSTAR H108
obdstar-x300-pro3-key-master 


X300 PRO3 key master by OBDSTAR Company features with the immobilizer key programming function of SKP900, as well as new function such as Odometer adjustment, EEPROM/PIC and OBDII. This car key programmer I got from uobdii.com charged US$485, compared to skp-900 who would charge more expensive. And as far as I know uobdii 9th Anniversary Free Shipping is under the way, at the outset I took a little money for Shipping.
Well, why do I say that this key programming tool suitable for me? I use X300 pro3 to successfully correct odometer of my car for odometer value is high enough to put up with. Several days ago, my best friend borrowed to reset oil service, he said it was easy to operate and he wanted to buy one too. I am happy my OBDATAR X300 PRO3 helps to solve his trouble. I have owned this hand-held key programmer for 3 months, and become a little expert with it.
Here I also share with you how to update software for OBDSTAR X300 Pro3 Key Master
At first, you should download the update tool and diagnostic software on www.obdstar.com, then double click the application to install.
Step1: When Update Tool installation complete, click the update tool icon on the desktop to start it.
Step2: Then click source menu, choose the program you want to update, click confirm
Step3: click and select all the software then click “update”
Step4: wait for several minutes until updating finished.
Final Statement: these are all my experience when using X300 Pro3, there is no suspicion of selling, please purchase according to your own needs and wishes.
OBDSTAR X300M
www.obdstartool.com

How to Update CGDI BMW Software?
Category: General
Tags: BMW CGDI BMW Key Programmer

CGDI Prog BMW MSV80 key programmer is able to update firmware and software on the official site: www.cgprogcar.com. Below parts incl. CGDI Prog Firmware and software update instruction.

This post show the guide on how to update CGDI BMW software.
 
Step 1. Receive message ” There is a new version”, click on “OK”
cgdi-prog-software-update-instruction-01

Step 2. Click on “Setting”, then “Check for updates”, waiting until the next dialog box appears.
cgdi-prog-software-update-instruction-02
Step 3. Checking local file.
cgdi-prog-software-update-instruction-03

Step 4. Detects a new file, click “Yes” to update.Auto Key Cutter
cgdi-prog-software-update-instruction-04

Step 5. Downloading file.
cgdi-prog-software-update-instruction-05

Step 6. Finish loading software.
cgdi-prog-software-update-instruction-06

Step 7. CGDI programmer software update successfully. Ready to use the newest software.
cgdi-prog-software-update-instruction-07

Done.

CGDI Prog

Auro OtoSys IM100 immobilizer system application
Category: General
Tags: Auro OtoSys IM100

Auro OtoSys IM100 IMMO application requires a data link to the IMMO ele ctronic  control system of the test vehicle for diagnosis via OBD II connection. The application retrieves vehicle IMMO information and performs IMMO related functions,including Key Learning, Remote Control Learning, Remote Control Add, etc.

There are two options available when accessing the IMMO section:
1. Smart Mode – accesses to a function menu where each function is
configured as a smart guide system.
2. Expert Mode – accesses to a function menu where each function is
separated from each other.

After a mode is selected and the tablet establishes communication with the
vehicle, the corresponding function menu or selection menu displays.

Smart Mode
The Smart Mode provides guided functions with step-by-step instructions.
Once the test vehicle is identified, a vehicle profile will display, select Yes to
continue.auto key program

The tablet will access the vehicle IMMO ECU to read IMMO related
information. Press OK to continue. Then the vehicle key status will display.


Read the vehicle key status carefully and press OK to display the function
menu.


The functions vary by IMMO parts, please follow the onscreen instructions to
select the correct IMMO part.
Automotive Key Programmer
src:http://www.uobdii.com/wholesale/auro-otosys-im100-key-programming-tool.html

Which BMW key programmer is best for you?
Category: General
Tags: BMW CGDI BMW Key Programmer

BMW key lost or need a clone? which BMW key programmer to use?
When you plan to buy a BMW key programmer online, have you wonder which key programmer do I know? Have you ask yourself or your friends like this “among these BMW key programmer supplied by the seller, which one should I buy”?
In the following parts, I will list some BMW key programmers, and generally tell you their similarities and differences.
keyfobs2




CGDI BMW 
 1.High technical tool which mainly support Auto diagnose, programming and security maintenance 3 in 1.
2.Support Key Programming for BMW CAS1/CAS2/CAS3, and Support Key Matching and All key lost for CAS4 /CAS 4+;
3. Support BMW Key Programming with OBD Functions

4. Software response fast, short time programming, and new breakthrough in operation safety and technical support.
5. Supported Languages: English, Chinese
6.  Certification: CCC,CE,GS, CCC,CE,GS,ISO
7. Warranty:1 year
8. Free Update Online on official website http://www.cgprogcar.com/?langid=en, when you receive the device, please download software on official website too.
9. Newly Add BMW FEM/EDC Function for free
http://www.cgdishop.com

AK90 Key Programmer AK90+ For All BMW EWS
Newest AK90 BMW KEY-PROG V3.19 is a safe and effecitive key match tool for BMW EWS system. It covers EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4,can read all EWS key information from 1995-2005.
Newest version:V3.19

AK90 Functions:
1. Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.
2. With the help of software you can renew , lock or unlock keys as well.
3. Programming original chips “EML 10030A” for making keys .
4. Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews.
BMW CAS AK300 AK300+ V1.5 Key Maker
AK300+ BMW CAS Key Maker (Support in 2002 -2009 years) especially for BMW CAS system key programmer.Support new BMW CAS,CAS2,CAS3,CAS3+. Automatic analysis CAS data,easy to match keys.
AK300 highlights in features and functions:
Highlights:
Language: English, Chinese
Operation System: Windows XP
Car Coverage: BMW 2002 -2009 Year
Firmware Version: 1.16
Software Version: 1.50
Support new BMW CAS,CAS2,CAS3,CAS3+. Automatic analysis CAS data
AK300+ Features:
1 BMW CAS supports a diagnosis of communication directly through the OBD port or through the CAN BUS port security to read and write data EEPROM;
2 automatic analysis CAS data, automatically displays the BMW keys to use quantity; key tooth number; remote control frequency; CAS with the DME synchronization ID; keys scrapped the state, etc.;
3 supports key scrapped or restart using the old key; this technology unmatched global technology;
4 supporting the rehabilitation of CAS computer (due to transfer table is damaged or programming lock);
5 supports the new 2002-2009 BMW CAS; CAS2; CAS3; CAS3+
6 support the horse CAS; CAS 2; CAS 3; CAS 3 + BMW and BMW remote key.
7.support E65/E66/E87/E60/E61/E90/E91/E92/E93/E71/E71

HiTag2 V3.1 Programmer
HiTag2 v.3.1 programmer is universal key programmer, with additional options of key programming from dump and PIN extraction. Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do everything automatically.
Language: English
Functions:
1.BMW (CAS1/2/3/3 +) at 912/9S12 immo + remote control, editing, KM, VIN, reading data from the key, read / write eeprom of the transponder, reading data from remote
2.AUDI (Kessy) on 93C66 immo + remote, read PIN, edit VIN number and immo
3.VW (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo
4.PORSCHE (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo
5.BENTLEY (Kessy) on 93C86 immo + remote, read PIN, edit VIN number and immo
6.CHRYSLER (State) on the 95040/95080 immo + remote, read PIN, VIN Edition
7.LAND ROVER (EWSх) to immo 9S12, editing VIN
8.NISSAN (NATS) at 95,080 immo
9.OPEL (CIM) in the 9S12 immo + remote, read PIN, VIN Edition
10.RENAULT (UCH) on 93C66 immo + remote, read PIN, VIN Edition
11.SAAB (CIM) for the 93LC66 immo + pilot edition of the VIN
Features:
1. Latest versions of HiTag2 transponders are fully supported.
2. Widest range of supported cars, using HiTag2 protocol.
3. Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality!
4. Correct BMW keys programming – RADIO REMOTE is working.
If you want to know more about BMW key programmer,you can visit our online shop uobdii.com

auto key programmer
UOBDII All rights reserved Which BMW key programmer do I know

Launch Easydiag 3.0 Update Version of Launch Easydiag 2.0
Category: General
Tags: Launch Easydiag 3.0

Recently,Launch X431 co.Ltd released their new product Launch Easydiag 3.0 plus,the update version of Launch Easydiag 2.0.


Launch Easydiag 3.0 Description: 
Launch EasyDiag3.0 is an integrated service platform based on automotive diagnostic solutions. Key features include automotive diagnostics, operational data query, vehicle maintenance, data and information sharing. The client communicates with the vehicle using a Bluetooth connector (DBScar connector).

Here UOBD2 make a compare between Launch Easydiag 3.0 and 2.0
 

    LAUNCH Easydiag 3.0 Plus LAUNCH Easydiag 2.0 Plus
Image    LAUNCH Easydiag 3.0 Plus LAUNCH Easydiag 2.0 Plus
Price   $165 with 2
free car software
$180 with
2 free car software
Bluetooth  
Android  
IOS  
Function Read and
clear codes
 
view enhanced
live data
 
Systems Engine
ABS
SRS
Transmission
more
Coverage Asian makes
European makes
North American
makes
  Customizable software 2 free vechicles
software+DEMO+EOBD
2 free vechicles
software+DEMO+EOBD
Update    Online for 1-year free  Online for 1-year free 
Language   Multi-language available  Multi-language available 
How to use OBDSTAR X300 DP PAD OBDII Diagnosis Function?
Category: General
Tags: OBDSTAR X300 DP PAD OBDSTAR

This is an OBDSTAR X300 DP PAD Programmer user manual, from vci connection to auto obdii diagnosis. The most details for you all, especially for newbies.
obdstar x300 pro3 key master
obdstar-x300-dp-diagnostic-tool
VCI connector connection

  1. Locate vehicle’s DLC socket. The DLC (Data Link Connector or Diagnostic Link Connector) is the standardized 16‐cavity connector where diagnostic code readers interface with the vehicle’s on‐board computer. The DLC is usually located 12 inches from the center of the instrument panel (dash), under or around the driver’s side for most vehicles. If Data Link Connector is not located under dashboard, a label should be there telling location. For some Asian and European vehicles, the DLC is located behind the ashtray and the ashtray must be removed to access the connector. If the DLC cannot be found, refer to the vehicle’s service manual for the location.
  2. Plug the VCI diagnostic connector into the vehicle’s DLC socket (It is suggested to use the OBD 2 extension cable to connect VCI connector and DLC socket.). For non‐16PIN DLC socket, please select the corresponding non‐16 pin connector adapter, then plug the non‐16pin end

of the adapter into the DLC socket, and then connect the standard 16pin end VCI connector.


Bluetooth setting
1.Enter Key Master to set System setting, and choose VCI information.
2.Operate according to following prompt:
A.“Please match: VCI_888888888888(Bluetooth name)”
b.“Connected: VCI_888888888888(Bluetooth name)”
C.“Not connected: VCI_888888888888(Bluetooth Name)” Please connect VIC connector to vehicle, X300 DP will connect automatically.

WIFI setup
Set Wi‐Fi on

  1. Enter main menu screen, choose “Settings” > WLAN
  2. When the WLAN sign appears blue, , it indicates Wi‐Fi has been activated already.

Note: To prolong the battery life, please switch Wi‐Fi off when it keeps
unattended.
Connect to WLAN
Start WLAN, if X300 DP within range of WLAN, X300 DP can automatically detect and connect to current WLAN, select desired network and input password, then you can surf the internet by WLAN.

Diagnosis flowchat
For new users, please follow the operation below to get familiar with and start using X300 DP.
VCI diagnostic connector VCI –> Bluetooth connection (USB connection)–>user registration–>user login–>download or upgrade software–>select function or vehicle type–>proceed diagnosis

User registration 
Click on the “DP” button to enter user registration diagnostic software. Select “the user information” in the “setting” menu, then enter user registration
obdstar-x300-dp-obdii-diagnosis-(1)
Fill in the information in each field (Items with * must be filled). After inputting, tap “OK”
If you have registered to be a member, click on “the user information” to enter user login page
obdstar-x300-dp-obdii-diagnosis-(2)
X300 DP diagnosis software download
Tap “One Key Upgrade” to enter one key upgrade page, as following picture shown:
obdstar-x300-dp-obdii-diagnosis-(3)
Tap “One Key Upgrade” to start downloading, enter main interface after finishing downloading. (Notes: Ensure internet connection is normal when updating. Besides, because of many software, it may take several minutes, please wait patiently) If need to cancel a software, just tap corresponding Check Box as below:
obdstar-x300-dp-obdii-diagnosis-(4)
Start Diagnosing
Tap on the main menu screen, and then choose “DP” to enter the function selection and vehicle selection page.
obdstar-x300-dp-obdii-diagnosis-(5) obdstar-x300-dp-obdii-diagnosis-(6) obdstar-x300-dp-obdii-diagnosis-(7)

Hereinafter, take OBDII for example, to introduce how to start diagnosing.
Tap ” OBDII ”, and tap “OBDII” icon.
obdstar-x300-dp-obdii-diagnosis-(7)
To select software version
obdstar-x300-dp-obdii-diagnosis-(9)
To enter diagnostic function menu,
obdstar-x300-dp-obdii-diagnosis-(9)
To select AUTO SCAN
obdstar-x300-dp-obdii-diagnosis-(11)
Read vehicle information
obdstar-x300-dp-obdii-diagnosis-(12)
Read trouble code
obdstar-x300-dp-obdii-diagnosis-(13)
Clear trouble code
obdstar-x300-dp-obdii-diagnosis-(13)
Read data stream
obdstar-x300-dp-obdii-diagnosis-(15) obdstar-x300-dp-obdii-diagnosis-(16)


Note: there are two versions of x300 dp obdstar in the market:
OBDSTAR X300 DP Standard version = Immobilizer+ Odometer Adjustment+ EEPROM/PIC Adapter + OBDII diagnosis
OBDSTAR X300 DP full version = Immobilizer + odometer adjustment + EEPROM/PIC adapter + OBDII diagnosis + ABS + TPS + SRS reset + TPMS(low tire)reset + Steering angle reset+ CVT learning/Value reset + EPB + Oil/service reset + Battery matching
( it works well in Diagnosis for Japanese and Korean cars.)
http://www.obdstartool.com

SEC-E9 to cut Toyota TOY43 keys in 2 ways?
Category: General
Tags: SEC-E9 Key cutting machine

Post on how to cut Toyota TOY43 keys with SEC-E9 automatic key cutting machine in 3 steps: Enter the key data, get the key number and cut the key.
sec-e9-cut-toyota-toy43-keys-01
Guide:

  1. Enter the key data of Toyota TOY43 in two ways.


Way 1: Select car manufacture, brand and year.
Tap “Automobile” button and “Toyota – Camry – 2006 -[10] to enter the key data.
sec-e9-cut-toyota-toy43-keys-02

Way 2: Input the key blank number
Tap “Search” button, input “TOY43” and select “Silca” – “TOY43(903) [10] ” to enter key data.
sec-e9-cut-toyota-toy43-keys-03
sec-e9-cut-toyota-toy43-keys-04
sec-e9-cut-toyota-toy43-keys-05
Tap “Info” button to see the key is aligned by tip. Usually no need to use stopper when fix the key position.
sec-e9-cut-toyota-toy43-keys-06
sec-e9-cut-toyota-toy43-keys-07

Step 2. Get the key numbers of Toyota TOY43 keys using SEC-E9 in 3 ways.
Way 1:Decoding the original key.
Tap “Decode ” button to enter the decoding page.
Select the dark blue icon as sense key location and “Round off”.
sec-e9-cut-toyota-toy43-keys-08
sec-e9-cut-toyota-toy43-keys-09
Check if the original key can open the cylinder.
sec-e9-cut-toyota-toy43-keys-10
Fix the original key on the top level of the clamp. please pay attention to the key position.
sec-e9-cut-toyota-toy43-keys-11
sec-e9-cut-toyota-toy43-keys-12
sec-e9-cut-toyota-toy43-keys-12

Tap the “Decode” button to start decoding the original key and get the key numbers.
sec-e9-cut-toyota-toy43-keys-14





Way 2: search key code.
This is key code for Toyota Camry key.


Tap “Code” button and input “55062” to get the key number.
sec-e9-cut-toyota-toy43-keys-20
sec-e9-cut-toyota-toy43-keys-21

Way 3: Input key numbers directly.
Tap “Input” button and input the key numbers you get from other ways, such as cylinder, Lishi tool, or instacode, etc.
sec-e9-cut-toyota-toy43-keys-22
Step 3. Cut a new Toyota Camry key.
Tap the “Cut” button to enter the cutting page.
sec-e9-cut-toyota-toy43-keys-23

Select “NKI-silver” as speed and the most right blue icon as sense key location.
sec-e9-cut-toyota-toy43-keys-24
sec-e9-cut-toyota-toy43-keys-25
Take out the original key and fix a new key blank on the top level of the clamp. Please pay attention to the key position.
sec-e9-cut-toyota-toy43-keys-26
Tap “cut” button to start cutting a new key. Please remember to close the safe gate.
sec-e9-cut-toyota-toy43-keys-27
sec-e9-cut-toyota-toy43-keys-28
SEC-E9 Cutting is done. Open the safe gate. Clean the clamp & the new keys.
Take out the new key.

The new key is working well.
sec-e9-cut-toyota-toy43-keys-29

http://www.uobdii.com/wholesale/sec-e9-cnc-automated-key-cutting-machine.html 

http://www.keycuttingmachine.org

How to view or delete software for Autel MD808 Pro?
Category: General
Tags: Autel MD808 Pro

This article aim at How to view or delete software for Autel MD808 Pro

To view the list of installed programs or to delete an installed program,please follow these steps:
1. Click on the Installed tag entry and the page will show the list of programs installed.
2. Select the program(s) that you would delete.

Batch delete:

Select the programs that you would delete by clicking on the check boxes to the left of those items. Then click the
Uninstall All button on the right bottom of screen.
Single delete:

Click the Uninstall button in the line of your would-be-deleted program.
3. A window asking “Are you sure to delete the software?” will pop upfor your confirmation.

Click on OK to delete the program(s) selected, or on Cancel to quit the action.
The deleted program will automatically add to the end of program list in the Update page in case you would like to install again.Autel MS908 Pro
In the search box on the right top corner of the screen, you can enter any words to search the software you desired, and this function works for both Update Available column and Installed column.

http://www.uobdii.com/wholesale/autel-maxidiag-md808-pro.html

SBB Key Programmer Register Nissan Note 2007 Chip Key
Category: General
Tags: SBB Key Programmer

This is a Nissan Note 2007  (automatic, right wheel, Intelligent Key). There is a working key, customer need to add chip key startup..So this post show the guide on how to register chip key for Nissan Note 2007 by SBB Key Programmer.
 

 
 
(Note: The tutorial is translated from Russian, for educational purpose only)
Diagnostic device ABRITES Vehicle Diagnostic Interface , when selecting (Nissan Note 2006+) requires a 12-digit PIN code, which is presumably considered for label located behind the glove compartment (glove box).
But the car has a sticker, so the chip should be registered with the device SBB Key Programmer.
 

How to calculate PIN code for registration key / chip in the car?

PIN will be assumed by the label BCM, with the help of the program AD600 Code Wizard Pro (Demo the Version) , which can be downloaded at this  link. Or by hand-held Nissan Pin code reader NSPC001.
To perform this procedure, you’ll need:
  • Net HITAG 2 transponder – PCF7936.
  • Wires (jumpers), for supplying power to the ignition contacts.

How to register the vehicle key / chip on Nissan Note using SBB Key Programmer?

1. Insert the device connector SBB v46.02 in OBDII vehicle.
2. The instrument select NISSAN JAPANthe MICRA MARCH 00-Gasoline
 
 
3. Then Insert a key and turn on the console – Insert the key into the lock, and turn the ignition switch on.
4. The instrument choose NATS 5the PROG. NEW KEYS.

 


5. Without the PIN CODE you CAN not program new keys – Without a PIN, you can not program the new keys.
 

6. Enter the 4-digit PIN number, counted on the label BCM.


7. Insert keys to be programmed in sequence and turn them on and off for 5 sec respectively. In the end start the engine for some sec. Press any key … Press – Insert the key to be programmed in sequence, one after the other, on and off the ignition for 5 seconds. After the end of the programming start the engine.
 

 

8. Once the button is pressed all quickly, without errors:

  • LED standard signaling, in the right corner at the windshield starts to blink.
  • Turning off the ignition, take out a sting from the ignition.
  • We put a thorn in the ignition, turn the ignition.
  • Turning off the ignition, take out a sting from the ignition.
  • Place the transponder antenna on the ignition.
  • Provide the + 12V on wire and KEY IN KEY PUSH (red-blue and red and white, respectively).
  • Turning on the ignition by supply of + 12V to the corresponding contacts ignition.
  • Turn off the ignition.
  • We start the engine.

http://www.carkeydeals.com
Article from SBB Key Programmer Blog Site: http://sbb-keyprogrammer.blogspot.com/2017/12/sbb-key-programmer-register-nissan-note.html

Free Download Full CARPROG V9.31 Software
Category: General
Tags: carprog carprog full

Free download CARPROG V09.31 software here to do airbag reset for your cars.
Free download CARPROG V09.31:
https://mega.nz/#!QF4D2ajZ!sew7H0E2wZeo7bfNdM3XJn4yN8i2BZGQ1u4nmR-O3dA



 

 

 

 


Operating system:
WINDOWS XP, WIN7, WIN8, WIN10
 Compatible device:
China CARPROG programmer



(carprog 9.31 is under test by uobd2 engineers; you may be risky to try; carprog 7.28 is ok and works good)

Function:
Carprog Full can do Airbag reset, Dashboard programming, immo (read pin code), MPU & EEPROM programming,radio decoding.

But CARPROG 7.28 does better in AIRBAG RESET
S5.1 – VAG (Audi, VW, Skoda, Seat) Airbag Reset Tool
S5.2 – BMW Airbag Reset Tool
S5.3 – Mercedes Benz Airbag Reset Tool
S5.4 – FORD Airbag Reset Tool
S5.5 – GM Airbag Reset Tool by OBDII
S5.6 – CARPROG CR16 Airbag tool – Audi, Mercedes, Ford, Volvo
S5.7 – Renault Airbag reset tool
S5.8 – Peugeot Airbag Reset tool
S5.9 – Citroen Airbag Reset tool
S5.10 – Honda Airbag Reset tool
S5.11 – Audi Airbag reset tool by direct connection to EEPROM or MPU
S5.14 – Ford Airbag Reset tool by direct connection to EEPROM or MPU
S5.16 – Hyundai Airbag Reset tool
S5.17 – KIA Airbag Reset tool
S5.18 – Lexus Airbag Reset tool
S5.19 – Rover Airbag Reset tool
S5.21 – Mazda Airbag Reset tool
S5.22 – Mitsubishi airbag reset tool
S5.23 – Nissan Airbag reset tool
S5.20 – Mercedes Benz Airbag Reset tool by direct connection
S5.25 – Opel Airbag reset tool by direct connection
S5.27 – Saab Airbag reset tool by direct connection
S5.28 – Subaru Airbag reset tool by direct connection
S5.30 – Toyota Airbag reset tool by direct connection
S5.31 – Alfa Romeo Airbag Reset Tool
S5.32 – Fiat Airbag Reset Tool
S5.33 – Porsche Airbag Reset Tool
S5.34 – Suzuki Airbag Reset Tool
S5.35 – Volvo Airbag Reset Tool
S5.36 – Daewoo Airbag Reset Tool

Carprog V9.31 update success!


This article post on : http://carprog-carprog.blogspot.com

Condor XC-Mini and SEC-E9,which is better?
Category: General
Tags: Condor xc-mini

Is SEC-E9 machine better than Condor xc-mini? Can do more keys like motor keys? Here’s full comparison table between Xhorse Condor mini master and SEC-E9 CNC laser key cutting machine.

Item  Xhorse Condor XC-Mini SEC-E9 Key Cutting Machine
Image  
 
Category  Automotive  Automotive
Weight  21.0KG Portable  24KG Portable
Touch Screen  7 inch  8 inch
Multi-language Portuguese/Spanish/ French/Germany/Russian/
Czech/Arabic/Turkish/Dutch/
Polish/Bulgarian/Norway/Slovakia/
Italian/English/Chinese
(Provide S/N to change/activate language)
English, Spanish,French, German,Italian,
Korean,Portuguese,Russian, Turkish, Czech
(Free to change language within machine)
Operating system Windows 7 (when update) Windows 8 Tablet PC
Support Key Type Car keys, motorcycles keys Car keys, motorcycles keys, truck keys, household keys, punch keys, tubular keys
Database Built-in database Built-in database
Update Online update Online update
Key Clamps 2 clamps, M1 & M2 in default Compatible with 10 clamps, some in default and some need purchase (see pic. attachment)
Warrenty 3 Year Warranty 1 Year Warranty
Price in uobd2 US$2,799 US$2,699

Condor MINI Support Vehicle Key Brands List:
Acura, Alfa Romeo, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Citroen, Daihatsu, Dodge, Ducati, Ferrari, Fiat, Ford, GCC, GMC, GreatWall, Holden, Honda, Hummer, Hyundai, Infiniti, Iveco, Jaguar, Jeep, Kia, Lancia, LandRover, LDV, Lexus, Lincoln, MAN, Mazda, Mercedes, Mercury, Mini, Mitsubishi, Nissan, Opel, Peugeot, Piaggio, Porsche, Proton, Renault, Rover, Saab, Scania, Seat, Skoda, Ssangyong, Subaru, Suzuki, Toyota, Vauxhall, Volkswagen, Volvo


All in all, SEC-E9 automatic key cutting machine is a good choice for locksmith. It can work perfect with different kinds of automobile key, motorbike key and household key. No need to buy other small key cutting machines for house keys. Can cut a new key without original key. It is the main difference from the traditional manual key cutting machine. Much more powerful than Condor xc-mini key cutter machine!

FAQ SEC-E9:
Q: Can the SEC-E9 machine cut household keys?
A: definitely yes!

Q: Condor mini cannot support the motor key; SEC-E9 support that?
A: Yes, SEC-E9 can cut motorbike keys without issues.

Q: What’s the different between Condor key cutting machine and SEC-E9?
A: SEC-E9 can cut motorcycle keys and household keys that Condor cannot support.
www.keycuttingmachine.org

RSS

Blog Categories
Recent Comments
"Where do we get real tech support and instructions?"
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner
"I have a X-100 pad just bought it. It scans well however the key..."
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner

This website is powered by Spruz