Tagged with "4+"
CGDI BMW program key on BMW CAS4 /CAS 4+ all key lost
Category: General
Tags: CGDI BMW program key on BMW CAS4 /CAS 4+ all key lost

Have BMW MSV80 and looking for a key programmer to add new key for BMW CAS1/CAS2/CAS3/CAS3+ and match key for CAS4 /CAS 4+ when all key lost, you must use CGDI Prog BMW MSV80 key programmer.
cgdi-pro-bmw-msv80-key-programmer-1

Attach one table which show CGDI Prog functions, workable models and working time
cgdi-pro-workable list-01

As you can see, CGDI Prog BMW MSV80 key programmer has these capabilities:

  1. 1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching, KEY all lost matching, CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.

2.BMW CAS4/CAS4+/Support key matching, support key all lost matching.
3.Support BMW key inspection, can check key what status in.
4.Support BMW engine computer DME replacement.
5.Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key) Exclusively support in Domestic
6.Support BMW Key unlock.

Moreover, CGDI Prog can perform:
1.Update in real time, products updated in zero cycle time, support model added in real time.
2.BMW CAS3/CAS3+Data repair–support change replace and split CAS computer, BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer, ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack, anti-software copy.

CGDI MB Benz

How to use CGDI Prog BMW MSV80 key programmer?
Method 1: can directly read ISN code in the car, please ensure the car voltage is 12V and above, it directly connects OBD to operate, takes about 5 minus.
Method 2: can directly disassemble engine computer (DME) to operate, follow the below guide to connect the line:
cgdi-pro-bmw-msv80-key-programmer-1
cgdi-pro-bmw-msv80-key-programmer-pic-4 
CGDI Shop

RSS

Blog Categories
Recent Comments
"Where do we get real tech support and instructions?"
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner
"I have a X-100 pad just bought it. It scans well however the key..."
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner

This website is powered by Spruz