General
Lonsdor K518 Program Key for Audi Q3 2013
Category: General
Tags: Lonsdor K518

This article share the guide on how to use Lonsdor K518 Key programmr to program key for Audi Q3 2013.And the article includes in 4 parts:
Function, Operation, Attention, and  Reference.


Function
1. Backup EPROM: backup car EPROM data;
2. Restore EPROM: copy the backed up EPROM data onto the car computer, to restore it to the original state;
3. Make dealer key: use the backed up EPROM data to write a blank new key to be a dealer key that can be programmed directly;
4. Add key (OBD): use the customized or generated dealer key to directly program key, applicable for the smart card;
5. Directly add key: use the customized or generated dealer key to directly program key, applicable for the folding key;
6. Delete key: delete the programmed key;
7. Reset dashboard
8. Odometer adjustment: to correct mileage;

Attention
1. During all the system operation, the dashboard will be in the extinguished state, that is normal;
2. Delete key process:
Step 1. Read immodata; Step 2. Select an existing key; Step 3. Write back immodata.

Reference
Chip model: Dedicated 48 chip
Remote type: 220G 315 frequency
Key embryo no.: No.31
PIN code requirement: Backup EPROM data
Remote generation: Program smart key complete, remote will automatically generated
OBD position: Under the steering wheel:

The car model
 


The key



Operation
Backup EPROM
1. This function can read the device EPROM data and save in K518ISE;
2. For smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Getting system data, it takes about 2 min, please be patient;
5. Read the vehicle PIN code and other info;
6. Please enter the file name to be saved;
7. EPROM data is saved.

Restore EPROM
1. Note: Write the wrong EPROM data may lead to the car can not start, please confirm that the data to be written is the car EPROM data backed up via K518ISE;
2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Please confirm the current data is the car EPROM data;
5. Writing EPROM data, about 2 minutes, please be patient;
6. Resetting the dashboard, EPROM data is restored.

Make dealer key
1. This function can generate a dealer key to be programmed, then use this key to perform “Add key” operation;
2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Getting system data, it takes about 2 min, please be patient;
5. Please choose to vehicle brand;
6. Please insert the blank key to be programmed into the K518ISE card slot;
7. Make dealer key success.

Add key (OBD)
1. This system is suitable for directly programming smart card dealer key.

Directly add key(suitable for folding dealer key directly programming)
1. This function can directly add a dealer key to the immobilizer system, please put the new key into the coil, and connect the host to the car OBD port;
2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Getting system data, it takes about 2 min, please be patient;
5. Writing immodata, about 2 minutes, please be patient;
6. Add key complete.
Delete key
1. This function can delete an existing key;
2.The process of this function:
Step 1. Read anti-theft data Step 2. Select an existed key Step 3. Write back immodata;
3. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
4. The system read out the part number, now is going through security certification, and loading external code;
5. Getting system data, it takes about 2 min, please be patient;
6. Please select the key to be deleted;
7. System communicating, delete complete.
Reset dashboard
1. Establishing communication, the system is resetting the dashboard;
2. Reset complete.

Odometer adjustment
1. This process can read and calibrate the odometer mileage;
2. if the car is a smart key, please turn off the ignition and then turn on the ignition, and then click OK, otherwise click OK;
3. Read the current mileage;
4. Going through security certification and loading external code, getting data, it takes about 2 minutes;
5. Please enter the new mileage needed to be calibrated ;
6. During writing... write complete.
Lonsdor K518 

Article from Lonsdor K518 Blog site: Lonsdor K518 Program Key for Audi Q3 2013

Lonsdor K518ISE Registration Activation, Update Manual
Category: General
Tags: Lonsdor K518ISE K518

Lonsdor K518ISE manual:

How to register

How to activate

How to update

 

How to Register Lonsdor K518ISE best key programmer?

After system updating, you need go to registration&activation.

For new user,

Click on Registration,

Input: user name(email), name(min 2 char), password(min 6 char), email verification code

Click on YES

Lonsdor K518ISE registration completes

(if interrupted after registration is done, you will go to the System update–Registered user to proceed).

Then go to Activation confirmation to continue.

 

How to Activate Lonsdor K518ISE car key programmer tool?

After confirming activation, it will go the password Setup interface

set 6-digit numbers as your startup password

information verification by Lonsdor

(5-30 minutes, you can check the progress by clicking “Refresh” )

re-enter the password to verify

get the notification that verification successful

the whole process before using the device is complete.

The most important note:

  1. User namemust be workable email address, so that you can receive the verification codefrom Lonsdor by email.
  2. Please pay attention to the difference between the registration password(min 6 char) and the startup password(6-digit), the former will generally only used when registration, so please commit the 6-digit startup password into memory, as this will be required every time when you start the device.
  3. The account will be bound to the corresponding device for life, other accounts can not log in your device and your account can not log in an registered or activated device either. 4. An account can be used to bind multiple new devices.

 

How to Update Lonsdor K518ISE Key Programmer?

Connect to the network

the Lonsdor K518ISE car key programming software system will automatically update to the latest version.

There are 3 ways of system update:

One key update: quickly update the new added or modified functions.

APK update: this is used when the APK is updated.

Force to update: this is used when the device is faulty or to retrieve data.

 

Lonsdor K518ISE Car List

Look here: http://blog.uobdii.com/lonsdor-k518ise-key-programmer-car-list/

Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.
Toyota/Lexus: smart key all key lost – via OBD ( without dismantle)
BMW CAS3/CAS3+/CAS3++: direct OBD programming
BMW CAS4/CAS4+: dismantle & read data programming
2016 -New Maserati: smart key programming
2016 -New Ford: smart key programming
Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.
Renault ( Megane, Koleos, Scenic) without PIN code key programming
VAG group 4th & 5th immobilizer system
Ferrari (458, F12, F149): direct OBD programming
Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.

Lonsdor K518ISE Immobilizer Car List:

Europe:
Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG, Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart, Borgward

America:
Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury

Asia:
Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki, Toyota, Shigaoka Queen

China:
Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car models are included)

Lonsdor K518ISE Odometer Correction Car List:

VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia…

Note: more high-end cars will be updated very soon.

 

So, Lonsdor K518ISE can be the best key programming machine for all cars.

1st key programmer tool in the world is able to:

Read PIN code to Kia / Hyundai function for Type 46 & 47 & 8Akeys + Add Smart Key without PIN code

Match keys for all Volvo models via OBD

Mazda 3 Angkesaila smart key program (2017)

BYD smart key program without Pincode

Nissan key system (4 Digit Pin Code)

Nissan remote system

Nissan smart key system (New 20 Digit Rolling Pin Code) incl. Qashqai(after 2015), X-TRAIL(before 2013), QX60(after 2013), teana-vip(after 2013), Cima(after 2013), JX35(after 2013)

Toyota Smart Key all lost

Lamborghini Porsche BMW & LandRover Ferrari Models covered

a lot of Chinese vehicles Great Wall Haval Borgward MG Beiqi Foton covered

Introduce Universal Smart Key Emulator:

SKE-LT: Smart Key emulator – Toyota/Lexus smart key for all key lost via OBD
Black:  SKE-LT-DST40(94/D4) -Supports 94/D4 smart key.
Red: SKE-LT-8A(88/A8)-Support 88/A8 smart key.
Green: SKE-LT-DST80(98)-Supports 98 smart key.
Blue: SKE-LT-8A(A9)-Supports A9 smart key.

OBDSTAR X300M mileage tool authorization failed (Solved)
Category: General
Tags: obdstar obdstar x300m

OBDStar x300m is 2017 powerful odometer adjustment tool launched by OBDSTAR completely according to industrial standard.

Obdstar X300M mileage tool file authorization failed, maybe you are facing this questions like this, but don’t know if should have to update the device,
And the error picture like this:
customer download the Ford in V30.26, but cannot use it,
x300m-01 x300m-02
Tech advice:

  1. You should check the device SN number, back us, we will check if  this SN number have opened related authorization, if so, just active it again.
  2. X300M configuration questions, need back us the unit to repair.

 More products,such OBDSTAR X300 Pro3,OBDSTAR F104....
Article from OBDSTAR Tool Blog Site:

How to solve the obdstar X300M mileage tool authorization failed
How to Register and Active Lonsdor K518 Key Programmer?
Category: General
Tags: Lonsdor K518ISE K518

How to Register Lonsdor K518ISE best key programmer?
After system updating, you need go to registration&activation.
For new user,
Click on Registration,
Input: user name(email), name(min 2 char), password(min 6 char), email verification code
Click on YES
Lonsdor K518ISE registration completes
(if interrupted after registration is done, you will go to the System update–Registered user to proceed).

Then go to Activation confirmation to continue.


How to Activate Lonsdor K518ISE car key programmer tool?

After confirming activation, it will go the password Setup interface
set 6-digit numbers as your startup password
information verification by Lonsdor
(5-30 minutes, you can check the progress by clicking “Refresh” )
re-enter the password to verify
get the notification that verification successful
the whole process before using the device is complete.
The most important note:

  1. User name must be workable email address, so that you can receive the verification codefrom Lonsdor by email.
  2. Please pay attention to the difference between the registration password(min 6 char) and the startup password(6-digit), the former will generally only used when registration, so please commit the 6-digit startup password into memory, as this will be required every time when you start the device.
  3. The account will be bound to the corresponding device for life, other accounts can not log in your device and your account can not log in an registered or activated device either. 4. An account can be used to bind multiple new devices.

Article from Lonsdor K518 Tech blog site:http://lonsdor-k518.blogspot.com/2017/10/lonsdor-k518ise-registration-activation.html

CGDI Prog MB Benz Key Programmer Customer Feedback
Category: General
Tags: vvdi mb vag CGDI MB Benz

Thanks to Mr.xxx (DK Veteran), who bought one CGDI Prog MB Mercedes Benz key Programmer and update the feedback with youtube videos.
Here we go in the tone of him:
13th October, 2017:
I order this tool. Waiting of dhl express tracking number! Will test read EZS and calculate Keys to test server, Mercedes W220 2003 Facelift and Mercedes W212 2009.
23rd October, 2017 feedback:
receive CGDI MB


If you want more powerful MB Benz Key programmer,below is the better choice:
Diagspeed MB Key OBD2
VVDI MB BAG Tool

First test Read Blank Key Read Write Erase (Post later other videos Read EZS, ….)
https://www.youtube.com/watch?v=8IATJpz_ITg&feature=youtu.be
W220 Read EZS and Password from Key
https://youtu.be/aJoEDBlc1hI
Tested on W212
Read EZS —> OBD work Fine
Calulating PW from EZS —> Work fine Online Server
Key Calculating —> v041 & v051 Work fine online Server

25th October, 2017 feedback: 
Next videos:
Mercedes W212 2010 e250 petrol
https://youtu.be/lCJLqxEJaUc
Mercedes W221 2010 Facelift S600 V12
https://youtu.be/NFEj21fd8WQ
26th October, 2017 wrote:
(My videos) On the cars all ok.
On all videos add only key with the option “with key”
Do not use “without key”
Test only cgdi tool.
One member test all key lost on w164, he say need wait 66min wait and need the ir emulator key very of put in and out more hundred of times
Company dealer say
In the next 2 weeks will come update and the other grey option will activate.
27th October, 2017 feedback:
Member tested w212 ALL KEY LOST !!! In car, done by OBD
Work realy realy good!
Member say:
W212 is from 2012
Read ezs About 30mins
Upload data
Querry
Password given

Read eis info
Paste key password
Save
Then key calculation
Very nice CGDI MB tool :-)
Many thanks for his feedback, he even promise when he has news he will post.
In addition, CGDI MB tokens:
This device also work with tokens for password online calculation
Here is info from dealer about token for CGDI MB:
free token half year, after that it is free in each day, if u calculate more ,than need to charge 8usd for 30times and 16usd for 60times. Also all key lost need ONLY 1 token.
Conclusion: 
CGDI MB need improved function and report what work and not for now in this device.
CGDI is new tool, just come to market less than 3 months, what I can see in video and some users posted, report back successful: For me it’s good tool and have many good future.
Even VVDI, and others (more expensive price) have problem when beginning and still have too. The most thing that many ask for is: Absent clearly manual to work correctly on bench: All key lost.
This tool is the best investment return for now even with youth problems.
Thanks to users’ big support, your encouragement is the driving force of CGDI.
http://www.uobdii.com/wholesale/cgdi-prog-mb-benz-key-programmer.html

Article from CGDI Prog Blog site:CGDI Prog MB  Benz Key Programmer Customer Feedback

Foxwell NT510 and iCarsoft Feedback on Jaguar X350
Category: General
Tags: foxwell NT510

China OBD2 
 
Car model and year: 2004 XJ Super V8.
Problem: parking sensor problems
Tools to use and test reports:

  1. I use a iCarsoft and it’s good reads live data so it will tell you what sensor has a fault.
  2. I have the same problem with my 2004 VDP, the parking alarm goes off for 3 secs and they do not work when reversing.

I week ago, I purchased an icarsoft i930 and under the “Parking aid control module” it gave me a C-1707 – Rear Left Center Sensor Failure (which is correct)

I saw that since the parking sensors are “sonic” i.e. they give out a very quiet “clicking noise” all 3 rear sensors were clicking except the one identified with the i930.

I have to say that I had a problem with the i930 that under the “ECU” section it gave me the “Fault in communication with vehicle ECU”.

(This fault also appears on other posts re scanners) I called the distributor I purchased it from and he said the better jaguar scanner was the Foxwell 510 and I have since upgraded to that model.

I am now waiting for the Foxwell 510 to arrive and will report back.

Foxwell NT510 scanner for Jaguar
Just received the new Foxwell 510 scanner for Jaguar and I am very impressed.
It had no problem communicating with all the modules on the 2004 XJ8 VDP it also shown up c-1430 and C-1707 rear left center sensor fault which will get done this week, hopefully.

So far ready like this scanner, comes with an excellent handbook, plus a CD with the handbook on, 59 pages much more complete than the icarsoft i930.

This scanner will do much more than I will ever need it for!!!
This is the one to get!!
Go to their website to download the manual.

Who sells the Foxwell scanner? It doesn’t appear that they do direct sales.
Original Foxwell $155 doesn’t need to pay for Jaguar software, but can add up to 5 car brands, 70usd/one brand.
Attach foxwelltool.com logo, please be confirmed before order one original NT510.

Article from:http://chasencai.over-blog.com/2017/10/foxwell-nt510-and-icarsoft-feedback-on-jaguar-x350.html

Super SBB2 Key Programmer Function List
Category: General
Tags: Super SBB2 Key Programmer

New Generation Super SBB2 Key Programmer, It has more stronger funtion than old SBB key programmer and CK100 key programmer. mainly programs kinds of key on a wide range of car brands from all of the world, as well as performs immobilizer, mileage adjustment, Oil/service Reset,TPMS EPS,BMS
Handheld scanner, easy to use.


Super SBB2 Key Programmer Function List

1. New keys programming;
2. Reads keys from immobilizer’s memory;
3. New immobilizer programming;
4. New ECU programming;
5. New mechanical key number programming;
6. Vehicle Identification Number programming;
7. Reset ECU&reset immobilizer;
8. Easy to operate by the guided menu programming;
9. New remote controller programming;
10. Immo PINCODE reader;
11. Odometer ajustment(Via obd);
12. With full and strong database for the most important vehicle makes;

obdstar tool

More detail about Super SBB2 Key programmer,please visit:
http://www.uobdii.com/wholesale/super-sbb2-key-programmer-with-special-function.html

Lonsdor K518ISE Program Maserati Smart Key 2016
Category: General
Tags: Lonsdor K518ISE K518

This Lonsdor K518ISE help file,it basically includes 4 parts: Function, Operation, Attention, and  Reference.

And there is a special website about Lonsdor K518 Key Programmer


Function

  1. The backup immodata: please refer to the "Operation" to backup immodata, after that program and delete key can be proceed;
  2. Add smart key: to program smart card, add key and all key lost have the same operation;
  3. Delete smart key: delete all the programmed smart cards.


Operation

  1. 2016- Maserati (Ghibli, Quattroporte, SUV: Levante) need to dismantle & read the onboard computer(ECU) data to get PIN code;
  2. Levante ECU located in the rear cover top of the car:

Lonsdor K518ISE Program Maserati Smart Key 2016-1

  1. The on-board computer of Ghibli and Quattroporte are located in the rear windshield, the former needs to dismantle from

the rear seat(see below). The latter needs to dismantle from the trunk audio position,then you will see the on-board computer.
Lonsdor K518ISE Program Maserati Smart Key 2016-2

  1. On-board computer appearance and dismantle/read eight feet chip (95640):

Lonsdor K518ISE Program Maserati Smart Key 2016-3 Lonsdor K518ISE Program Maserati Smart Key 2016-4
 

  1. Backup immodata (as shown below)
  2. Connect K518ISE main host to KPROG adapter, and connect 12V power supply (must use K518ISE dedicated power supply);
  3. Weld the eight feet chip (95640)  on the "E-01 board";
  4. Click the menu to start backing up the data.
  5. Data backup complete, please weld the chip back to the onboard computer and install well;

Lonsdor K518ISE Program Maserati Smart Key 2016-5
Note: If you can not read data with the KPROG adapter, you can use a programmer to read and copy the data into the K518ISE specified folder, the path: K518 -> file -> feature_553

  1. Add / delete key
  2. Please follow the system prompts.

Attention

  1. The deleted smart card key can only be used for the vehicle to do program operation;
  2. Emergency flasher (dangerous warning light) position, as shown in red circle:

Lonsdor K518ISE Program Maserati Smart Key 2016-6

  1. For the new Maserati models, in the bottom of the pole position has a "knob" as shown below, cars without this knob belong to the old system before 2016.

Lonsdor K518ISE Program Maserati Smart Key 2016-7
Reference
Chip model: Dedicated smart card
PIN code requirement: Dismantle/read the onboard computer to get PIN code  (Please refer to the "Operation" for details)
Remote generation: Program smart key complete, remote will automatically generated
Under the steering wheel:

Lonsdor K518ISE Program Maserati Smart Key 2016-8

Article from Lonsdor K518ISE Blog site:Lonsdor K518ISE Program Maserati Smart Key 2016

Launch X431 v 8 inch scan tool BEST PRICE
Category: General
Tags: Launch X431 Launch X431 v8

Where to get a Launch X431 V scan tool for the best quality and best price? Here you go.
Launch X431 v 8 inch scan tool price: US$803

 

Why do you need a new Launch X431 scan tool?

Because:
1- it supports special functions
2- it has full vehicle coverage: Brazilian, Indian, Chinese Australian, cars…
3- it supports BMW the 2007 year
4- it supports Toyota the 2007 year
5- it can do VW online programming without German server

Go on your reading for details…

1- 2017 Launch x431 v supports “Special Functions”
The 2017 version of Launch x431 v diagnostic tool 100% works good in special functions, especially perfect in auto key programming.
Special functions incl. Injector test, Fuel pump test, Purge control solenoid, Oil Reset Service , Steering Angle Calibration, Electronic Parking Brake Reset , Battery Register / Battery Maintenance , ABS Bleeding , Electronic Throttle Position Reset / Learn , Diesel Particulate Filter (DPF) Regeneration , Tire Pressure Monitor System Reset….

For repairmen working in a garage,
– The most popular functions in a repair garage: All covered!!!!!!
TPMS, Oil, Brake, SAS, Gear Learn & Bleeding….
– Very easy to operate: Click, click…done!
Launch engineers optimize the program;
users just click to finish it and never worry about damage when using
– Low cost: no need buy many repair parts

For example,
TPMS reset is necessary after the tire inflation or tire change; with 2017 version launch x431 v, the car repair shop can earn more, almost no need the cost.


2- Widest vehicle coverage among launch x431 scan tool
The new Launch x431 v 8-inch diagnostic tool has the widest vehicle coverage: up to 93 car brands about 220 car models.
– It can work good on Brazilian, Malaysian, Chinese, India and Australian cars, which almost can not be achieved with old launch 431 v scanners.
There almost no good and reliable diagnostic equipment for cars from Brazil, Chinese, India, Australia, so that the Launch team develops and adds the cars successfully.
– Also, it covers almost full European and USA cars.

Note: car software can be updated for FREE within 2 years.
Usually, what users pay for launch x431 software update is worth a new machine with a bit extra cost. So, the 2-year free update means that the users get 2 machines at a price of 1 machine; that is, save the cost for one machine.

Article from Launch X431 site:http://blog.x431tool.com/launch-x431-v-8-inch-scan-tool-best-price/

Function feedback of OBDSTAR X300 Pro3 Key Mastar on models
Category: General
Tags: OBDSTAR OBDSTAR X300 DP OBDSTAR X300 Pro3
All OBDSTAR X300 PRO3 feedback on key programming, odometer adjustment, EEPROM and PIC. Just enter “Ctrl +F” to search whether the car model you plan to test is workable (BTW, more feedbacks will be added)
Post contents:
Part 1: OBDSTAR X300 PRO3 feedback on key programming
Part 2: OBDSTAR X300 PRO3 feedback on Odometer adjustment
Part 3: OBDSTAR X300 PRO3 feedback on EEPROM function and workable car models
Part 4: OBDSTAR X300 PRO3 feedback on PIC function and workable car models
 
Part 1: OBDSTAR X300 Pro3 Key Master feedback on key programming
It can do key programming for PSA ford fiat VAG.
Toyota 4Runner (2006) ok
Lexus RX400H (2005) ok
For Honda it’s great edit vin etc
For Nissan smart keys it’s awesome
For Toyota ck100 all keys lost
Works on Hyundai and Kia
Did Kia Ria 2014 with I4D60…. Cannot read pin but programmed key when we had pin.
Did Hyundai i10 2012. Read Pin and programmed 7936 (ID46). Quick and easy.
Do key for great wall Volex c30 2012 read pin code program key ok
K13 worked perfect
Insignia 2011 read security code +program keys OK
Just make key for ford focus 2011 on 80bit transponder 10 min job done
Part 2: OBDSTAR X300 PRO3 feedback on Odometer adjustment
1)For VAG group vehicles:
Audi A3 is on the list from 2003 – 2006, 2007- up personally I have not tried
Audi A3 2008 monocolore OK
it can make Audi normal a6 before 2009
Volkswagen Tiguan 2013 TFT color dash nec+24C64 ok
Volkswagen caddy 2014 white meter NEC24C64 via obd
Volkswagen Caddy 2014 with TFT Color dash via obd
Volkswagen Caddy 2014 with TFT Color dash via obd
Seat Ibiza 2014 Via obd ok
Volkswagen Polo 2014 with NEC24C64
06 a8 OK
2013 golf with black/white screen – OK (with latest update)
Golf 6 2012 white color, write 2 sec !!
Q5 2013 via obd ok
Tiguan 2012 tft color NEC24C64 ok
Volkswagen Polo 2014 White Meter NEC24C64 using golf menu OK
Passat 2009 mileage nec+24c32 OK
kia sportage r 2014 d70f423 mieage tested ok
Can support vw micronas
Skoda Octavia 2010 nec+24c32 VDO mileage OK
Skoda Superb 2012 via obd mileage ok
Polo 2004 VDO k Line mileage OK
Audi A4 2007… in 20 seconds by OBD.
Volkswagen Amarok 2014 ok ( chose golf NEC 24C64 white meter 2013-)
2013 jetta mono display ok.
2) For Hyundai
Hyundai verna fluidic obd ok
Hyundai accent 2012 by obd ok 24c16
Hyundai Creta D70F3525 ok
Hyundai Verna 24c16 ok
I20 2015 TESTED.VERY GOOOD.OK OK OK
Hyundai Accent 2011… by obd in 2 seconds
3)Kia
Kia Sportage with 24c16 2012 work perfect
Kia sportage 2013 round dash screen obd success
Kia sorrento 24c16 al ok obd
4)Opel
Opel Isignia 2011 works well via obd
Astra J 2010 ok
Astra J 2011 read Security Code ok (via gm cruze)
Opel Insignia 2009/2011 OK
Opel Zafira 2012 OK
Opel astra 2010 2011 2012 NOT OK
5) Chevrolet
Chevrolet Cruze 2010, 2011, 2012 via obd Ok
Chevrolet Cruze 2014 via obd take less than 4 seconds
Chevrolet cruze lt 2012 alla key lost ….OK 10 min programing and mileage correction ok
Chevrolet CRUZE 2012, Read security code ok and Mileage ok
Chevrolet Cruze 13 miles ok
Chevrolet Captiva 2012, 2013 ok
6) Range Rover
Range Rover Evoque 2013 via obd ok
Range Rover Evoque SD4 2013 ok less than 2 seconds
Evoque 2012 works OBD
Rang rover sport 2014 , 10 sec after buckup all ok
7) Kia
Kia optima mileage correction: ok
kia sorento um 2016 ok obd2
8) Ford
Ford Tourneo 2015 H9S12EXQ384
Read ori Value ok
Focus 2013 OK
Ford fiesta 2012 OK
9) Fiat
Fiat grand punto 2010 OK
Fiat punto 2007 OK
Fiat fiorino obd ok
8) Others
New update mileage correction for hyundai Sonata 9
Benz yes bmw no
Honda civic 2006 all keys lost OK
Porsche Cayenne 2012 mileage OK
have made KM visteon dash 95320 vw golf 5 with success, just plug and play
Jeep grand cherokee 2013 OK
Jeep compas 2014 for obd2 2008+
I20 24c16 ok (Note: if you WANT TO DO KM IN HYUNDAI I20 THEN YOU HAVE TO PUT KM 4 TIME MORE EX. 1000 KM NEED THEN PUT 4000 KM IN X100.)
2006 Chrysler 300c -> will do dash via obd but won’t do SRI
Hummer H2 2008 via obd ok
2014 Altima Via obd ok
i20 by obd ok ….. so i had to make the x4 solution given on this thread example for 25300km = 25300×4 ; sometimes gives 9999999 some times 564873248 whatever but keep trying 1 or more number more on total.
Rio obd ok
Part 3: OBDSTAR X300 PRO3 feedback on EEPROM function and workable car models
OBDSTAR X300 PRO3 working with eeprom adaptor for immo matching (EEPROM is used to read out password from EEPROM chip and restore data).
This is what you can read with eeprom adapter
EEPROM/PIC ADAPTER
EEPROM
Read pin code
Audi
Engine ECU(95040)
Engine ECU(95080)
Immobiliser(C46M6)
Dash board(C66M6)
Dash board(93C86)
Baic
E150
BCM(24C16)
Engine ECU(95080)
E130
BCM(24C16)
Engine ECU(95080)
Brilliance
Delphi Immobiliser ECU(93C66)
Buick
Sail
Engine ECU(95080)
Excelle XT
BCM(24C16)
New GL8
BCM(24C16)
09-Lacrosse
BCM(24C16)
09-Regal
BCM(24C16)
Encore
BCM(24C16)
BCM(24C32)
Cadillac
SLS
BCM(93C86)
SRX
BCM(24C16)
Changan
Cm8
Engine ECU(95080)
CX20
BCM(93C46)
CX30
BCM(93C46)
Yuexiang
BCM(93C46)
Zhixiang
BCM(93C46)
Benben
Immobiliser(95040)
Honor
Engine(95080)
Changhe
Immobiliser(93C46)
Chery
STEC Immobiliser
Engine ECU(95080)
DIAS Immobiliser
Immobiliser(24C02)8 pin
Chery Self
Immobiliser(24C02)8 pin
Delphi
Immobiliser(93C66)
Smart Key
95160
Chevrolet
Aveo
BCM(95160)
Cruze
-2014
BCM(24C16)
2014-
BCM(24C32)
Trax
BCM(24C16)
Chrysler
Immobiliser(24C16)
Immobiliser(95080)
Cherokee
4.7 Immobiliser(24C02)4 pin
09Jeep Immobiliser ECU(24C16)
Citroen
Berlingo
BSI 95160
Xsara
BSI 95040
V1
V2
C2
BSI 95128
BSI 95160
C3
BSI 95160
C5
BSI 95160
Picasso
BSI 95160
Triumph
BSI 95128
V1
V2
V3
Elysee
Immobiliser(93C46)
C-QUATRE 2014
BSI(95128)
~~~ang
Immobiliser(93C46)
Dflz
Lianchuang Immobiliser(24C02)8 pin
Dfpv
S30
Immobiliser(93C46)
Immobiliser(24C02)8 pin
H30
Immobiliser(24C02)8 pin
Geely
Emgrand
Immobiliser(93C56)
EC820 Mitsubishi Immobiliser(24C02)
Global Hawk
Shiye jiaotong Immobiliser ECU(24C02)4 pin
Yuanjing
Engine ECU(95080)
Huapu
Immobiliser(24C02)4 pin
Greatwall
Delphi Immobiliser ECU(93C66)
Shiye jiaotong ImmobiliserECU(24C02)4 pin
M2
Immobiliser ECU(24C02)8 pin
Wingle disel engine ECU(95320)
Pincode 1
Pincode 2
EDC16C39-6.H1(95320)
Hafei
Immobiliser(24C02)8 pin
Engine ECU(95080)
Hnmazda
323(8C chip)
Engine ECU(93C56)
Immobiliser(24C02)8 pin
Shiye jiaotong Immobiliser ECU(24C02)4 pin
Engine ECU(95080)
Hawtai
Boliger
Immobiliser (24C02)8 pin
SANTAFE
Immobiliser(24C02)8 pin
Disel engine ECU 2007(95040)
Isuzu
Immobiliser(93C66)
Lotus
Immobiliser(93C56)
Immobiliser(24C02)8 pin
MG
MG3
Engine ECU(95080)
BCM(24C16)
BCM(95160)
MG5
BCM(95160)
MG6
Engine ECU(95080)
Mitsubishi
Wing god
Immobiliser(24C16)
Jiangling
X6
Engine ECU(95320)
X8
Engine ECU(95320)
Liebao
Immobiliser(24C02)8 pin
Engine ECU(95080)
Peugeot
206
BSI 95160
V1
V2
207
BSI 95160
307
BSI 95160
BSI 95128
V1
2008 V2
2010 V3
406
BSI 93C66
BSI 95040
407
BSI 95128
408
BSI 95128
607
BSI 93C66
Porsche
Engine ECU(95128)
Engine ECU(95160)
ROEWE
350
2013
BCM(95160)
2014
BCM(24C16)
550
Engine ECU(95080)
W5
2013
BCM(95160)
2014
BCM(24C16)
Skoda
Engine(95040)
VW
Bora
Engine(95040))
Beetle
Engine(95040)
Gol
Immobiliser(93LC56B)
Jetta
Dash board(2007–2009)
Engine(2007–2012)
Lavida
Engine(95040)
Passat
Engine(95040))
Polo
Engine(95040))
Engine(95080))
Sagitar
Engine(93C86)
Engine(95040)
Santana
Immobiliser(93LC56B)
Immobiliser(24C04)
Sharan
Engine(95040)
Toureg
Engine(95040)
Engine(95160)
Engine(95128)
ZZnissan
Engine ECU(95320)
Immobiliser(24C02)8 pin
Zotye
Immobiliser(24C02)4 pin
Data initialization
Toyota/Lexus
Immobiliser initialization
VIOS immobiliser(with G)
Key chip 4D60(93C66)
Help
Camry immobiliser
With G
89780-60380(93C66)
Without G
89780-06020(93C66)
Help
Corolla immobiliser
89780-02070(93C66)(Without G)
Help
RAV4 immobiliser(with G)
89780-0R040(93C66)
Help
Other immobiliser(with G)
Data initialization(93C66)
Help
4C chip
Camry
Engine initialization(93C56)
Help
Corolla
-05 month 6
Engine initialization(93C56)
Help
05 month 6-
Immobiliser initialization(93C66)
Help
Vela
Engine initialization-0D340(93C56)
Engine initialization-0D350(93C56)
Engine initialization-0D660(93C56)
Help
Smart key system
Crown(12 generation)
Smart key 89990-30061(S2943)
Help
Zelas(2011)
Steering column lock ECU 5290(93C46)
Immobiliser 89990-21010(93C86)
Help
Highlander
Smart key 89990-0E020(93C86)
Immobiliser 89784-0E020(93C46)
Help
Lexus
ES350
Smart key 89990-33330(93C86)
Immobiliser 89784-33030(93C56)
Help
IS250
Smart key 89990-53130(93C86)
Immobiliser 89784-53030(93C46)
Help
RX270
Smart key 89990-48240(93C86)
Immobiliser 89784-48040(93C46)
Help
Previa
Smart key 89990-28131(93C86)
Immobiliser 89784-28011(93C46)
Help
13 New REIZ
Steering column lock ECU 5290(93C46)
Smart key 89990—0P020(93C86)
Help
Camry
2009
Smart key89990-06021(93C86)
Immobiliser 89784-06020(93C46)
Help
2014
Steering column lock ECU 5290(93C46)
Smart key 89990-06140(93C86)
Help
RAV4
-2012
Smart key 89300-42070(93C86)
Immobiliser 89784-0R020(93C46)
Help
2014
Steering column lock ECU 5290(93C46)
Smart key 89990—0R030(93C86)
Help
EEPROM RW
24CXX Series
24C01
24C02
24C04
24C08
24C16
24C32
24C64
93CXX serial
93C46
93C56
93C57
93C66
93LC66A
93C76
93C86
25CXX Series
25010
25020
25040
25080
25160
25320
25640
25128
25256
95CXX Series
95010
95020
95040
95080
95160
95320
95640
95128
95256
Part 4: OBDSTAR X300 PRO3 Key Master Feedback on PIC function and workable car models:
The PIC adapter working with OBDSTAR X300 PRO3 is to read write CPU data on a part of car computer.
PIC adapter workable car models (05-26-2016 update):
Initialize CPU data for immobilizer coil on FAW Wei Chi V5(PIC)
Initialize CPU data for immobilizer coil on FAW N5 (FREESCALE)
Initialize CPU data for immobilizer coil on FAW N7 (FREESCALE)
Why immobilizer coil needs to be initialized?
Take FAW Wei Chi V5 (Immobilizer coil model is 89783-52Q40) and FAW N5/N7 (Immobilizer coil model is 89783-TBA00) for example, if their keys are lost, the 4S tend to replace new immobilizer coil then match key, usually a immobilizer coil cost about $50-$85. However, our OBDSTAR PIC adapter is designed to initialize adapter without replacing immobilizer coil, you just directly match new key after immo coil initialization. Besides, PIC adapter is able to initialize immo coil for unlimited times, which will help car owner save the new immobilizer coil cost and also time cost.

This article Post in http://obdstar-obdstar.blogspot.com/2016/06/function-feedback-of-obdstar-x300-pro3.html
Autel TPMS tool TS601 Price Cut Down
Category: General
Tags: Autel Autel TS601

Exciting news: Autel TPMS tool TS601 price $495 incl. shipping (on www.uobdii.com), it’s really a good price after you compared it with Amazon Aliexpress. It will be sent soon after paid, ship from Hong Kong, 3-5 working days delivery, one year free update on the internet via USB port, some users feedback they can’t register with serial number doesn’t exist, it is clone. Well www.uobdii.com is the real one, please feel free to use.

As known TS601 is the most powerful TPMS tool among Autel TS501, TS601, most users prefer to TS601, for their difference, here a comparison table:

 Autel MaxiTPMS TS601 Vs TS501 Vs TS401 Vs PAD Vs MS906TS

Here YouTube Video on, how to use TS601 to test clone create TPM sensor and
program MX-sensor:

 



It will well pack come in a nice box.
autel-tpms-diagnostic-and-service-tool-maxitpms-ts601-9
Here collect several pieces of Autel TPMS tool TS601 Questions and Answers:
Question:
I have a tpms light on for my front driver side. will this read the possibly faulty sensor and program a new one if need be?
Answer: Edit: Just checked the tool and it describes the procedure for each vehicle. 350Z requires a tool with OBDII connection to load the ID’s.
Question: can TS601 tool program the original ID #to the new sensor and relearn thanks
Answer: Can this tool program all car make and model accurate check for all sensor
Question:Is there any way to find out the coverage of cars this unit will work on? Ie. I have 2009 Subaru Outback
Answer:It is a amazing product and it does cover the 09 Subaru
Question:Will this work on a 2012 subaru impreza?
Answer: yes it can

All rights reserved by www.uobdii.com

Article from TPMS Blog: Autel TPMS tool TS601 Price Cut Down

XTOOL EZ400 PRO, Xtool EZ400 & Xtool PS90 which is better?
Category: General
Tags: xtool

XTOOL EZ400 PRO is different from Xtool EZ400 in the VCI box, XTOOL EZ400/EZ400 Pro is different from Xtool PS90/PS80 in the special functions.

More about obd2 tool,pls visit:blog.uobdii.com

  1. Different:

1). XTOOL EZ400 PRO = Xtool EZ400 + VCI box
XTOOL EZ400 PRO is all-in-one machine, no need any more VCI box, so it is 2.64LB lighter than Xtool EZ400, lighter package means less shipping cost and easier to use.

Attach Xtool EZ400 VCI box
xtool-ez400-vci-box
Attach XTOOL EZ400 PRO full package (without the above Xtool VCI box)
ez400-pro-diagnostic-tool

2). XTOOL EZ400 PRO / XTOOL EZ400 functions < Xtool PS90
Xtool PS90 (10inch tablet with wifi and all function):
Full system diagnosis on all makes……confirmed
IMMO……confirmed
Odometer Adjustment ……confirmed
Special functions (Oil Reset/Engine Oil Light Reset, EPB Electrical Parking Brake Adaptation, TPS Throttle Body Adaptation, EPS Electric Power Steering Calibration, Gear Learning, ABS Bleeding , ECU Reset, Tire Pressure Warning Light Reset and Battery Reset.) ……confirmed

XTOOL EZ400 PRO 7″ functions:
Full system diagnosis on all makes……confirmed
Special functions works: Oil Reset/Engine Oil Light Reset, EPB Electrical Parking Brake Adaptation, TPS Throttle Body Adaptation …confirmed Launch X431

3). XTOOL EZ400 PRO / XTOOL EZ400 is much cheaper than Xtool PS90
Xtool PS90: 1500 dollars to 2900 dollars (google to confirm)
XTOOL EZ400: 554 dollars
XTOOL EZ400 PRO: 479 dollars
SRC: http://www.uobdii.com/wholesale/xtool-ez400-pro.html 
 

  1. Same:
  • Original Xtool products and update on Xtool official site xtooltech.com.
  • Full system diagnosis…… confirmed
  • Both can perform these special functions: Oil Reset/Engine Oil Light Reset, EPB Electrical Parking Brake Adaptation vehicle fix
  • One-year free update, one-click software update via WIFI
  • After-sales technicalsupport (Remote access).


That’s all

RSS

Blog Categories
Recent Comments
"Where do we get real tech support and instructions?"
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner
"I have a X-100 pad just bought it. It scans well however the key..."
In: Xtool X100 Pad “Please input security code” (Solved)
by: Thinner

This website is powered by Spruz